EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive vs. Subtractive Manufacturing: A Comparative Life Cycle and Cost Analyses of Steel Mill Spare Parts

Luis Segovia-Guerrero, Nuria Baladés, Juan J. Gallardo-Galán, Antonio J. Gil-Mena, David L. Sales

Journal of Manufacturing and Materials Processing · 19.04.2025 · 9 (4) · 138

DOI: 10.3390/jmmp9040138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 19.04.2025. Verfasst von Luis Segovia-Guerrero und 4 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministerio de Ciencia e Innovación, Junta de Andalucía, University of Cadiz’s Support and Stimulus Plan for Research and Transfer 2022–2023.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the context of growing environmental concerns and the demand for more sustainable manufacturing practices, this study evaluates the environmental and economic performance of two production routes for a stainless steel support block used in steel mills. A comparative Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) were conducted to assess a conventional subtractive manufacturing process based on Computer Numerical Control (CNC) machining versus a hybrid approach that combines Plasma Arc-Wire Arc Additive Manufacturing (PA-WAAM) with CNC finishing. The LCA was carried out using ReCiPe 2016 Midpoint and Endpoint methodologies in SimaPro, while the LCC employed a cradle-to-gate cost model. Results showed that the hybrid WAAM-CNC route reduced average environmental impacts by 49% across 18 categories and decreased steel consumption by approximately 70% due to near-net-shape fabrication. Although the hybrid method incurred an approximate 3.5 times increase in unit production cost, this was primarily attributed to equipment investment. In contrast, operational costs such as labor, materials, and consumables were significantly lower—by 66%, 28%, and 45%, respectively. These findings support the hybrid approach as a more sustainable manufacturing alternative with the potential for long-term cost optimization as additive technologies mature.

Förderung

  • Spanish Ministerio de Ciencia e Innovación
  • Junta de Andalucía
  • University of Cadiz’s Support and Stimulus Plan for Research and Transfer 2022–2023
  • II Call for research project grants of the Cepsa Foundation Chair 2023
  • UE
  • UCA

Zitieren

APA

Segovia-Guerrero, L., Baladés, N., Gallardo-Galán, J. J., Gil-Mena, A. J., & Sales, D. L. (2025). Additive vs. Subtractive Manufacturing: A Comparative Life Cycle and Cost Analyses of Steel Mill Spare Parts. Journal of Manufacturing and Materials Processing, 9(4), 138. https://doi.org/10.3390/jmmp9040138

Vancouver

Segovia-Guerrero L, Baladés N, Gallardo-Galán JJ, Gil-Mena AJ, Sales DL. Additive vs. Subtractive Manufacturing: A Comparative Life Cycle and Cost Analyses of Steel Mill Spare Parts. Journal of Manufacturing and Materials Processing. 2025;9(4):138. doi:10.3390/jmmp9040138

BibTeX
@article{SegoviaGuerrero2025,
  author = {Segovia-Guerrero, Luis and Baladés, Nuria and Gallardo-Galán, Juan J. and Gil-Mena, Antonio J. and Sales, David L.},
  title = {Additive vs. Subtractive Manufacturing: A Comparative Life Cycle and Cost Analyses of Steel Mill Spare Parts},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2025},
  volume = {9},
  number = {4},
  pages = {138},
  doi = {10.3390/jmmp9040138}
}
Kostenlos starten →