EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fatigue Enhancement Mechanism and Process Optimization of the Direct Mandrel Cold Expansion Technique on Lightweight and High-Strength Alloys

Hansong Ji, Kanghua Huang, Li He, Zefeng Chen, Mingjun Tang, Pingfa Feng, Jianfu Zhang

Journal of Manufacturing and Materials Processing · 03.03.2025 · 9 (3) · 81

DOI: 10.3390/jmmp9030081 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 03.03.2025. Verfasst von Hansong Ji und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lightweight and high-strength alloys such as Al and Ti alloys are commonly employed materials for aviation structural components. A “hole-fastener” is commonly used for their connection, and DMCE (direct mandrel cold expansion) is a reliable technique in industries to enhance the fatigue properties of hole-involved components due to its advantages, i.e., convenient, efficient and cost-effective. However, an inadequate understanding of the DMCE process leads to a vast amount of waste in industries when any materials or structural parameters are changed. In order to promote the application efficiency of the DMCE process in aviation industries and reduce the energy and resource waste caused by repeated attempts, taking Al7050 and TB6 as examples, this paper comprehensively investigates the fatigue enhancement mechanism of the DMCE process on lightweight and high-strength alloys. Numerical models with 12.9%, 36.9% residual stress prediction errors and 9.98%, 14.8% radial plastic deformation prediction errors for Al and Ti holes were established, and then simulations were performed to screen out five significant influence parameters from eleven independent parameters. On this basis, DMCE experiments with significant parameters were carried out, and the improvement mechanisms of the DMCE process on the tangential residual stress, radial plastic deformation and surface morphology of Al and Ti hole walls were comparatively analyzed. Furthermore, fatigue life prediction models for two-hole-involved specimens were generated via multiple linear regression, which exhibit, respectively, 13.5% and 33.9% mean prediction errors for Al and Ti alloys. Moreover, the optimal DMCE schemes were obtained and 2.33 and 4.12 times fatigue lifetime improvements were achieved for the Al and the Ti specimens.

Zitieren

APA

Ji, H., Huang, K., He, L., Chen, Z., Tang, M., Feng, P., & Zhang, J. (2025). Fatigue Enhancement Mechanism and Process Optimization of the Direct Mandrel Cold Expansion Technique on Lightweight and High-Strength Alloys. Journal of Manufacturing and Materials Processing, 9(3), 81. https://doi.org/10.3390/jmmp9030081

Vancouver

Ji H, Huang K, He L, Chen Z, Tang M, Feng P, et al. Fatigue Enhancement Mechanism and Process Optimization of the Direct Mandrel Cold Expansion Technique on Lightweight and High-Strength Alloys. Journal of Manufacturing and Materials Processing. 2025;9(3):81. doi:10.3390/jmmp9030081

BibTeX
@article{Ji2025,
  author = {Ji, Hansong and Huang, Kanghua and He, Li and Chen, Zefeng and Tang, Mingjun and Feng, Pingfa and Zhang, Jianfu},
  title = {Fatigue Enhancement Mechanism and Process Optimization of the Direct Mandrel Cold Expansion Technique on Lightweight and High-Strength Alloys},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2025},
  volume = {9},
  number = {3},
  pages = {81},
  doi = {10.3390/jmmp9030081}
}
Kostenlos starten →