Comparison of Modulation-Assisted Machining Strategies for Achieving Chip Breakage When Turning 17-4 PH Stainless Steel
Journal of Manufacturing and Materials Processing · 02.08.2024 · 8 (4) · 167
DOI: 10.3390/jmmp8040167 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 02.08.2024. Verfasst von Ainhoa Robles und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 Research and Innovation.
Abstract (Originalsprache)
Chip morphology is an intrinsic characteristic of the machining process that determines the quality of the process. When machining low machinability materials, the chips formed are usually long, continuous, and difficult to break. Due to the negative effect of the accumulation of the chip along the process, chip breakage and the correct extraction out of the machining area have become indispensable requirements. Although numerous chip-breaking methodologies have been proposed, modulation-assisted machining (MAM) is one of the most promising approaches, due to its independence from the workpiece material, tool geometry, and cutting conditions. In this work, a comparison of different modulation-assisted machining strategies, based on the modulation of the feed (F-MAM) or the depth of cut (D-MAM), were experimentally evaluated and compared to conventional turning in terms of chip morphology, surface roughness, and tool wear. Results showed that both MAM strategies enabled chip breakage and improved chip evacuation in comparison to conventional turning; however, D-MAM showed a better performance in terms of tool wear and surface roughness.
Förderung
- European Union’s Horizon 2020 Research and Innovation
Zitieren
APA
Robles, A., Astarloa, A., Llanos, I., Mancisidor, I., Fernandes, M. H., & Munoa, J. (2024). Comparison of Modulation-Assisted Machining Strategies for Achieving Chip Breakage When Turning 17-4 PH Stainless Steel. Journal of Manufacturing and Materials Processing, 8(4), 167. https://doi.org/10.3390/jmmp8040167
Vancouver
Robles A, Astarloa A, Llanos I, Mancisidor I, Fernandes MH, Munoa J. Comparison of Modulation-Assisted Machining Strategies for Achieving Chip Breakage When Turning 17-4 PH Stainless Steel. Journal of Manufacturing and Materials Processing. 2024;8(4):167. doi:10.3390/jmmp8040167
BibTeX
@article{Robles2024,
author = {Robles, Ainhoa and Astarloa, Asier and Llanos, Iñigo and Mancisidor, Iker and Fernandes, Maria Helena and Munoa, Jokin},
title = {Comparison of Modulation-Assisted Machining Strategies for Achieving Chip Breakage When Turning 17-4 PH Stainless Steel},
journal = {Journal of Manufacturing and Materials Processing},
year = {2024},
volume = {8},
number = {4},
pages = {167},
doi = {10.3390/jmmp8040167}
}
EUVIMED