A New Grinding Wheel Design with a 3D Internal Cooling Structure System
Journal of Manufacturing and Materials Processing · 26.07.2024 · 8 (4) · 159
DOI: 10.3390/jmmp8040159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 26.07.2024. Verfasst von Sharlane Costa und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FCT, Portuguese Foundation for Science and Technology (FCT).
Abstract (Originalsprache)
This work discusses challenges in conventional grinding wheels: heat-induced tool wear and workpiece thermal damage. While textured abrasive wheels improve heat dissipation, the current surface-only methods, such as those based on laser and machining, have high renewal costs. The proposed manufacturing technology introduces an innovative 3D cooling channel structure throughout the wheel, enabling various channel geometries for specific abrasive wheel applications. The production steps were designed to accommodate the conventional pressing and sintering phases. During pressing, a 3D organic structure was included in the green body. A drying cycle eliminated all present fluids, and a sintering one burnt away the structure, revealing channels in the final product. Key parameters, such as binder type/content and heating rate, were optimized for reproducibility and scalability. Wear tests showed a huge efficiency increase (>100%) in performance and durability compared of this system to conventional wheels. Hexagonal channel structures decreased the wear rates by 64%, displaying superior wear resistance. Comprehensive CFD simulations evaluated the coolant flow through the cooling channels. This new design methodology for three-dimensionally structured grinding wheels innovates the operation configuration by delivering the coolant directly where it is needed. It allows for increasing the overall efficiency by optimizing cooling, reducing tool wear, and enhancing manufacturing precision. This 3D channel structure eliminates the need for reconditioning, thus lowering the operation costs.
Förderung
- FCT
- Portuguese Foundation for Science and Technology (FCT)
Zitieren
APA
Costa, S., Capela, P., Souza, M. S., Gomes, J. R., Carvalho, L., Pereira, M., & Soares, D. (2024). A New Grinding Wheel Design with a 3D Internal Cooling Structure System. Journal of Manufacturing and Materials Processing, 8(4), 159. https://doi.org/10.3390/jmmp8040159
Vancouver
Costa S, Capela P, Souza MS, Gomes JR, Carvalho L, Pereira M, et al. A New Grinding Wheel Design with a 3D Internal Cooling Structure System. Journal of Manufacturing and Materials Processing. 2024;8(4):159. doi:10.3390/jmmp8040159
BibTeX
@article{Costa2024,
author = {Costa, Sharlane and Capela, Paulina and Souza, Maria S. and Gomes, José R. and Carvalho, Luís and Pereira, Mário and Soares, Delfim},
title = {A New Grinding Wheel Design with a 3D Internal Cooling Structure System},
journal = {Journal of Manufacturing and Materials Processing},
year = {2024},
volume = {8},
number = {4},
pages = {159},
doi = {10.3390/jmmp8040159}
}
EUVIMED