A Study on Powder Spreading Quality in Powder Bed Fusion Processes Using Discrete Element Method Simulation
Journal of Manufacturing and Materials Processing · 16.05.2024 · 8 (3) · 101
DOI: 10.3390/jmmp8030101 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 16.05.2024. Verfasst von Panagiotis Avrampos und 1 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Technical University of Athens.
Abstract (Originalsprache)
Powder deposition is a very important aspect of PBF-based additive manufacturing processes. Discrete Element Method (DEM) is commonly utilized by researchers to examine the physically complex aspects of powder-spreading methods. This work focuses on vibration-assisted doctor blade powder recoating. The aim of this work is to use experiment-verified DEM simulations in combination with Taguchi Design of Experiments (DoE) to identify optimum spreading parameters based on robust layer quality criteria. The verification of the used powder model is performed via angle of repose and angle of avalanche simulation–experiment cross-checking. Then, four criteria, namely layer thickness deviation, surface coverage ratio, surface root-mean-square roughness and true packing density, are defined. It has been proven that the doctor blade’s translational speed plays the most important role in defining the quality of the deposited layer. The true packing density was found to be unaffected by the spreading parameters. The vertical vibration of the doctor blade recoater was found to have a beneficial effect on the quality of the deposited layer. Ultimately, a weighted mean quality criteria analysis is mapped out. Skewness and kurtosis were proven to function as effective indicators of layer quality, showing a linear relation to the weighted means of the defined quality criteria. The specific weights that optimize this linearity were identified.
Förderung
- National Technical University of Athens
Zitieren
APA
Avrampos, P., & Vosniakos, G. (2024). A Study on Powder Spreading Quality in Powder Bed Fusion Processes Using Discrete Element Method Simulation. Journal of Manufacturing and Materials Processing, 8(3), 101. https://doi.org/10.3390/jmmp8030101
Vancouver
Avrampos P, Vosniakos G. A Study on Powder Spreading Quality in Powder Bed Fusion Processes Using Discrete Element Method Simulation. Journal of Manufacturing and Materials Processing. 2024;8(3):101. doi:10.3390/jmmp8030101
BibTeX
@article{Avrampos2024,
author = {Avrampos, Panagiotis and Vosniakos, George-Christopher},
title = {A Study on Powder Spreading Quality in Powder Bed Fusion Processes Using Discrete Element Method Simulation},
journal = {Journal of Manufacturing and Materials Processing},
year = {2024},
volume = {8},
number = {3},
pages = {101},
doi = {10.3390/jmmp8030101}
}
EUVIMED