EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Study of the Cold Metal Transfer (CMT) Welding of Thin Austenitic Steel Plates with an Equivalent Heat Source Approach

Hichem Aberbache, Alexandre Mathieu, Nathan Haglon, Rodolphe Bolot, Laurent Bleurvacq, Axel Corolleur, Fabrice Laurent

Journal of Manufacturing and Materials Processing · 26.01.2024 · 8 (1) · 20

DOI: 10.3390/jmmp8010020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 26.01.2024. Verfasst von Hichem Aberbache und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The CMT (cold metal transfer) arc welding process is a valuable joining method for assembling thin sheets, minimizing heat transfers, and reducing subsequent deformations. The study aims to simulate the CMT welding of thin stainless-steel sheets to predict temperature fields and deformations. Both instrumented tests and numerical simulations were conducted for butt-welding of sheets with a thickness of 1 to 1.2 mm. Weld seam samples were observed to identify equivalent heat sources for each configuration. The electric current and voltage were monitored. Temperature measurements were performed using K-type thermocouples, as well as displacement measurements via the DIC (digital image correlation) technique. Thermomechanical simulations, considering phase changes and the actual seam geometry induced by filler material, were conducted using an equivalent heat source approach. A unique heat exchange coefficient accounting for thermal losses was identified. By incorporating these losses into thermal calculations, a good agreement was found between measured and calculated temperatures. Mechanical calculations allowed for the recovery of the horse saddle form after actual welding, with a relative difference of less than 10% in angular distortion between calculated and measured values.

Zitieren

APA

Aberbache, H., Mathieu, A., Haglon, N., Bolot, R., Bleurvacq, L., Corolleur, A., & Laurent, F. (2024). Numerical Study of the Cold Metal Transfer (CMT) Welding of Thin Austenitic Steel Plates with an Equivalent Heat Source Approach. Journal of Manufacturing and Materials Processing, 8(1), 20. https://doi.org/10.3390/jmmp8010020

Vancouver

Aberbache H, Mathieu A, Haglon N, Bolot R, Bleurvacq L, Corolleur A, et al. Numerical Study of the Cold Metal Transfer (CMT) Welding of Thin Austenitic Steel Plates with an Equivalent Heat Source Approach. Journal of Manufacturing and Materials Processing. 2024;8(1):20. doi:10.3390/jmmp8010020

BibTeX
@article{Aberbache2024,
  author = {Aberbache, Hichem and Mathieu, Alexandre and Haglon, Nathan and Bolot, Rodolphe and Bleurvacq, Laurent and Corolleur, Axel and Laurent, Fabrice},
  title = {Numerical Study of the Cold Metal Transfer (CMT) Welding of Thin Austenitic Steel Plates with an Equivalent Heat Source Approach},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2024},
  volume = {8},
  number = {1},
  pages = {20},
  doi = {10.3390/jmmp8010020}
}
Kostenlos starten →