EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers

Mahrukh Sadaf, Mario Bragaglia, Lidija Slemenik Perše, Francesca Nanni

Journal of Manufacturing and Materials Processing · 16.01.2024 · 8 (1) · 14

DOI: 10.3390/jmmp8010014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 16.01.2024. Verfasst von Mahrukh Sadaf und 3 weiteren Autor:innen. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 150 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) has attracted huge attention for manufacturing metals, ceramics, highly filled composites, or virgin polymers. Of all the AM methods, material extrusion (MEX) stands out as one of the most widely employed AM methods on a global scale, specifically when dealing with thermoplastic polymers and composites, as this technique requires a very low initial investment and usage simplicity. This review extensively addresses the latest advancements in the field of MEX of feedstock made of polymers highly filled with metal particles. After developing a 3D model, the polymeric binder is removed from the 3D-printed component in a process called debinding. Furthermore, sintering is conducted at a temperature below the melting temperature of the metallic powder to obtain the fully densified solid component. The stages of MEX-based processing, which comprise the choice of powder, development of binder system, compounding, 3D printing, and post-treatment, i.e., debinding and sintering, are discussed. It is shown that both 3D printing and post-processing parameters are interconnected and interdependent factors, concurring in determining the resulting mechanical properties of the sintered metal. In particular, the polymeric binder, along with its removal, results to be one of the most critical factors in the success of the entire process. The mechanical properties of sintered components produced through MEX are generally inferior, compared with traditional techniques, as final MEX products are more porous.

Förderung

  • Slovenian Research Agency

Zitieren

APA

Sadaf, M., Bragaglia, M., Perše, L. S., & Nanni, F. (2024). Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers. Journal of Manufacturing and Materials Processing, 8(1), 14. https://doi.org/10.3390/jmmp8010014

Vancouver

Sadaf M, Bragaglia M, Perše LS, Nanni F. Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers. Journal of Manufacturing and Materials Processing. 2024;8(1):14. doi:10.3390/jmmp8010014

BibTeX
@article{Sadaf2024,
  author = {Sadaf, Mahrukh and Bragaglia, Mario and Perše, Lidija Slemenik and Nanni, Francesca},
  title = {Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2024},
  volume = {8},
  number = {1},
  pages = {14},
  doi = {10.3390/jmmp8010014}
}
Kostenlos starten →