EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Microstructure–Porosity–Hardness of Thermal Plasma-Sprayed NiTi Coating Layers

Sneha Samal, Jakub Zeman, Stanislav Habr, Oliva Pacherová, Mohit Chandra, Jaromír Kopeček, Petr Šittner

Journal of Manufacturing and Materials Processing · 07.11.2023 · 7 (6) · 198

DOI: 10.3390/jmmp7060198 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 07.11.2023. Verfasst von Sneha Samal und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Science Foundation (CSF), Project Solid-21 for the support within the Institute of Physics, Prague, Czech Republic, MEYS CR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The quality of NiTi coating influences the thermal, microstructural, and mechanical behavior of the material produced by plasma spraying. To understand the behavior of the coating, the study has been designed and planned at two different plasma powers with various feed rates. NiTi as shape memory layers emerge as promising protective coatings on the surface of substrates against corrosion or wear. In the present investigation, NiTi multilayers were produced by thermal plasma spraying using NiTi (50 at. %) powder as the feedstock material. This work illustrates the studies of the microstructure, porosity of the coating layers, phase detection, hardness values, shape memory behavior, and the formation of samples produced by different spraying parameters. The porosity within coating layers has been analyzed based on the various shape factors of pores that correlate with the hardness and mechanical behavior of the samples. This work will explore the quality of the coating in terms of its porosity and compactness, which will affect the performance of the shape memory behavior. The functional coating of NiTi will have a significant influence on the durability of the material’s performance against corrosion.

Förderung

  • Czech Science Foundation (CSF)
  • Project Solid-21 for the support within the Institute of Physics, Prague, Czech Republic
  • MEYS CR

Zitieren

APA

Samal, S., Zeman, J., Habr, S., Pacherová, O., Chandra, M., Kopeček, J., & Šittner, P. (2023). Evaluation of Microstructure–Porosity–Hardness of Thermal Plasma-Sprayed NiTi Coating Layers. Journal of Manufacturing and Materials Processing, 7(6), 198. https://doi.org/10.3390/jmmp7060198

Vancouver

Samal S, Zeman J, Habr S, Pacherová O, Chandra M, Kopeček J, et al. Evaluation of Microstructure–Porosity–Hardness of Thermal Plasma-Sprayed NiTi Coating Layers. Journal of Manufacturing and Materials Processing. 2023;7(6):198. doi:10.3390/jmmp7060198

BibTeX
@article{Samal2023,
  author = {Samal, Sneha and Zeman, Jakub and Habr, Stanislav and Pacherová, Oliva and Chandra, Mohit and Kopeček, Jaromír and Šittner, Petr},
  title = {Evaluation of Microstructure–Porosity–Hardness of Thermal Plasma-Sprayed NiTi Coating Layers},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2023},
  volume = {7},
  number = {6},
  pages = {198},
  doi = {10.3390/jmmp7060198}
}
Kostenlos starten →