EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Robotic Belt Finishing with Process Control for Accurate Surfaces

Ramón Torres, Sara Mata, Xabier Iriarte, David Barrenetxea

Journal of Manufacturing and Materials Processing · 01.07.2023 · 7 (4) · 124

DOI: 10.3390/jmmp7040124 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 01.07.2023. Verfasst von Ramón Torres und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EUROSTARS GRINDBOT project, Government of Navarre Doctorados Industriales program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aerospace industry still relies on manual processes for finish applications, which can be a tedious task. In recent years, robotic automation has gained interest due to its flexibility and adaptability to provide solutions to this issue. However, these processes are difficult to automate, as the material removal rate can vary due to changes in the process variables. This work proposes an approach for automatically modeling the material removal process based on experimental data in a robotic belt grinding application. The methodology concerns the measurement of the removed mass of a test part during a finishing process using an automatic precision measurement system. Then, experimental models are used to develop a control algorithm for continuous material removal that maintains a uniform finishing process by regulating the robot’s feed rate. Next, the results for various experimental material removal models under different process conditions are presented, showing the process parameter’s influence on the removal capacity. Finally, the proposed control algorithm is validated, achieving a constant material removal rate.

Förderung

  • EUROSTARS GRINDBOT project
  • Government of Navarre Doctorados Industriales program

Zitieren

APA

Torres, R., Mata, S., Iriarte, X., & Barrenetxea, D. (2023). Robotic Belt Finishing with Process Control for Accurate Surfaces. Journal of Manufacturing and Materials Processing, 7(4), 124. https://doi.org/10.3390/jmmp7040124

Vancouver

Torres R, Mata S, Iriarte X, Barrenetxea D. Robotic Belt Finishing with Process Control for Accurate Surfaces. Journal of Manufacturing and Materials Processing. 2023;7(4):124. doi:10.3390/jmmp7040124

BibTeX
@article{Torres2023,
  author = {Torres, Ramón and Mata, Sara and Iriarte, Xabier and Barrenetxea, David},
  title = {Robotic Belt Finishing with Process Control for Accurate Surfaces},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2023},
  volume = {7},
  number = {4},
  pages = {124},
  doi = {10.3390/jmmp7040124}
}
Kostenlos starten →