EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Metrology of Sheet Metal Distortion and Effects of Spot-Welding Sequences on Sheet Metal Distortion

Enkhsaikhan Boldsaikhan, Michael Milhon, Shintaro Fukada, Mitsuo Fujimoto, Kenichi Kamimuki

Journal of Manufacturing and Materials Processing · 04.06.2023 · 7 (3) · 109

DOI: 10.3390/jmmp7030109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 04.06.2023. Verfasst von Enkhsaikhan Boldsaikhan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kawasaki Heavy Industries, Inc., The Boeing Company through the Center for Friction Stir Processing.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Refill friction stir spot welding (RFSSW) is an emerging solid-state welding technology that demonstrates an outstanding ability to join aerospace aluminum alloys. The thermomechanical processing of RFSSW may cause variations in the workpiece in the form of distortion. This study aims to establish a metrology method for sheet metal distortion with the intent to investigate the effects of RFSSW sequences on sheet metal distortion. The approach employs a robotic metrology system and the least squares method to measure and estimate the flatness of sheet metal before RFSSW and after RFSSW. The RFSSW experimentation produces five 10-spot-weld panels with five different RFSSW sequences, whereas the RFSSW sequences are based on the common practice of making sheet metal assemblies. A panel consists of two lap-welded sheets where the top sheet, a 6013-T6 aluminum alloy, is refill friction stir spot welded onto the bottom sheet, a 2029-T8 aluminum alloy. The results suggest that RFSSW sequences do have effects on sheet metal distortion. The panel with the worst distortion has a root-mean-square error of 0.8 mm as an average deviation from the ideal flatness.

Förderung

  • Kawasaki Heavy Industries, Inc.
  • The Boeing Company through the Center for Friction Stir Processing

Zitieren

APA

Boldsaikhan, E., Milhon, M., Fukada, S., Fujimoto, M., & Kamimuki, K. (2023). Metrology of Sheet Metal Distortion and Effects of Spot-Welding Sequences on Sheet Metal Distortion. Journal of Manufacturing and Materials Processing, 7(3), 109. https://doi.org/10.3390/jmmp7030109

Vancouver

Boldsaikhan E, Milhon M, Fukada S, Fujimoto M, Kamimuki K. Metrology of Sheet Metal Distortion and Effects of Spot-Welding Sequences on Sheet Metal Distortion. Journal of Manufacturing and Materials Processing. 2023;7(3):109. doi:10.3390/jmmp7030109

BibTeX
@article{Boldsaikhan2023,
  author = {Boldsaikhan, Enkhsaikhan and Milhon, Michael and Fukada, Shintaro and Fujimoto, Mitsuo and Kamimuki, Kenichi},
  title = {Metrology of Sheet Metal Distortion and Effects of Spot-Welding Sequences on Sheet Metal Distortion},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2023},
  volume = {7},
  number = {3},
  pages = {109},
  doi = {10.3390/jmmp7030109}
}
Kostenlos starten →