EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Shape and Detectability of Pores with X-ray Computed Tomography

Benjamin Baumgärtner, Juan Hussein, Tino Hausotte

Journal of Manufacturing and Materials Processing · 23.05.2023 · 7 (3) · 103

DOI: 10.3390/jmmp7030103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 23.05.2023. Verfasst von Benjamin Baumgärtner und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft (DFG, German Research Foundation).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Component porosity is a quality attribute in additive manufacturing (AM). One possibility for the non-destructive three-dimensional determination of porosity or pore shape is X-ray computed tomography (CT), which enables an investigation of the influence of AM process parameters on the appearance and characteristics of the pores. Since there is no porosity standard for CT, a traceable determination of the measurement uncertainty is not possible. Using a digital twin of the CT system, an estimation of the CT measurement uncertainty is in principle possible. In this contribution, experimental CT analyses of powder bed fusion samples made of Ti64 and PA12 are compared with CT simulations. The results show a size-dependent influence on the shape and detectability of the pores. Using the CT model, a simulated shape- and material-dependent probability of detection (POD) is calculated.

Förderung

  • Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)

Zitieren

APA

Baumgärtner, B., Hussein, J., & Hausotte, T. (2023). Investigation of the Shape and Detectability of Pores with X-ray Computed Tomography. Journal of Manufacturing and Materials Processing, 7(3), 103. https://doi.org/10.3390/jmmp7030103

Vancouver

Baumgärtner B, Hussein J, Hausotte T. Investigation of the Shape and Detectability of Pores with X-ray Computed Tomography. Journal of Manufacturing and Materials Processing. 2023;7(3):103. doi:10.3390/jmmp7030103

BibTeX
@article{Baumgrtner2023,
  author = {Baumgärtner, Benjamin and Hussein, Juan and Hausotte, Tino},
  title = {Investigation of the Shape and Detectability of Pores with X-ray Computed Tomography},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2023},
  volume = {7},
  number = {3},
  pages = {103},
  doi = {10.3390/jmmp7030103}
}
Kostenlos starten →