Distributionally Robust Fatigue-Constrained Topology Optimization for Additive Manufacturing Under Spatially Correlated Fatigue-Strength Uncertainty
Journal of Manufacturing and Materials Processing · 13.11.2026 · 10 (11) · 509
DOI: 10.3390/jmmp10110509 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 13.11.2026. Verfasst von Shams Torabnia und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Topology optimization is increasingly important for additive manufacturing because it enables lightweight structures with complex load paths, while process-induced variability can produce spatial heterogeneity in fatigue resistance. This study develops a distributionally robust fatigue-constrained topology optimization framework that distinguishes two sources of uncertainty: spatial variability in local fatigue strength and ambiguity in the probabilities assigned to sampled uncertainty realizations. Spatial variability is represented by a correlated fatigue-strength random field, while probability-model ambiguity is treated using a discrete Kullback–Leibler ambiguity set. The framework is evaluated using an Al 6061-T6 cantilever benchmark and transfer studies involving Ti-6Al-4V, an L-bracket geometry, and a three-dimensional benchmark. In the principal Al case, KL-DRO reduces independent out-of-sample fatigue exceedance from 17.56% to 12.88% and lowers the 95th-percentile fatigue measure from 1.999 to 1.685, with an approximately 2.2% increase in material relative to mean-risk optimization. Similar reductions are observed for the L-bracket and three-dimensional benchmarks, whereas Ti-6Al-4V and matched material studies show little or no advantage. The results therefore indicate that KL-DRO can improve out-of-sample fatigue-tail performance when fatigue risk is active and the empirical uncertainty support is sufficiently informative, but it does not universally outperform mean-risk optimization. The proposed framework provides a computational basis for incorporating spatially resolved fatigue-property uncertainty into topology optimization for additively manufactured structures.
Zitieren
APA
Torabnia, S., Han, P., Fonseca, N., Abbas, M., Boyce, S. M., & Hsu, K. (2026). Distributionally Robust Fatigue-Constrained Topology Optimization for Additive Manufacturing Under Spatially Correlated Fatigue-Strength Uncertainty. Journal of Manufacturing and Materials Processing, 10(11), 509. https://doi.org/10.3390/jmmp10110509
Vancouver
Torabnia S, Han P, Fonseca N, Abbas M, Boyce SM, Hsu K. Distributionally Robust Fatigue-Constrained Topology Optimization for Additive Manufacturing Under Spatially Correlated Fatigue-Strength Uncertainty. Journal of Manufacturing and Materials Processing. 2026;10(11):509. doi:10.3390/jmmp10110509
BibTeX
@article{Torabnia2026,
author = {Torabnia, Shams and Han, Pu and Fonseca, Nathan and Abbas, Mohamed and Boyce, Sophia Michelle and Hsu, Keng},
title = {Distributionally Robust Fatigue-Constrained Topology Optimization for Additive Manufacturing Under Spatially Correlated Fatigue-Strength Uncertainty},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {11},
pages = {509},
doi = {10.3390/jmmp10110509}
}
EUVIMED