EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Laser Shock Peening on Gradient Microstructural Evolution and Mechanical Properties of Friction-Stir-Welded 7075 Aluminium Alloy Joints

Bin Hu, Long Li

Journal of Manufacturing and Materials Processing · 12.11.2026 · 10 (11) · 506

DOI: 10.3390/jmmp10110506 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 12.11.2026. Verfasst von Bin Hu und 1 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Quality Engineering Project of Chuzhou Polytechnic, Anhui Provincial Department of Education Talent Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the effects of one-sided laser shock peening (LSP) on friction-stir-welded (FSW) 7075 aluminium alloy joints. It compares depth-dependent grain refinement, residual stress and local hardness in the nugget zone and relates these measurements to the transverse tensile response of the whole joint. Electron backscatter diffraction measurements at corresponding depths showed that the largest measured grain-size difference occurred 100 μm below the treated surface, where the mean grain size was 7.95 μm in the untreated joint and 1.54 μm after LSP. This difference diminished with depth. The weld-longitudinal residual stress changed from tensile to compressive at the treated surface, reaching approximately −280 MPa. It changed sign at a depth of 0.5–0.6 mm, while the treated and untreated stress profiles approached each other at approximately 0.9 mm. At a depth of 0.5 mm, microhardness increased from 126.8 to 135.6 HV. In transverse tension, mean yield strength increased from 346.8 to 383.9 MPa, ultimate tensile strength from 381.2 to 419.8 MPa, and elongation after fracture from 5.47% to 7.13%. These results show that LSP produced depth-dependent microstructural and residual stress changes, accompanied by local hardening and improvements in the tensile response of the joint.

Förderung

  • Quality Engineering Project of Chuzhou Polytechnic
  • Anhui Provincial Department of Education Talent Program

Zitieren

APA

Hu, B., & Li, L. (2026). Effect of Laser Shock Peening on Gradient Microstructural Evolution and Mechanical Properties of Friction-Stir-Welded 7075 Aluminium Alloy Joints. Journal of Manufacturing and Materials Processing, 10(11), 506. https://doi.org/10.3390/jmmp10110506

Vancouver

Hu B, Li L. Effect of Laser Shock Peening on Gradient Microstructural Evolution and Mechanical Properties of Friction-Stir-Welded 7075 Aluminium Alloy Joints. Journal of Manufacturing and Materials Processing. 2026;10(11):506. doi:10.3390/jmmp10110506

BibTeX
@article{Hu2026,
  author = {Hu, Bin and Li, Long},
  title = {Effect of Laser Shock Peening on Gradient Microstructural Evolution and Mechanical Properties of Friction-Stir-Welded 7075 Aluminium Alloy Joints},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {11},
  pages = {506},
  doi = {10.3390/jmmp10110506}
}
Kostenlos starten →