Rotary Burnishing of Internal Tube Surfaces with a Preloaded Compliant Crown: A Force–Geometry–Compliance Model and Parametric Sensitivity Analysis
Journal of Manufacturing and Materials Processing · 11.11.2026 · 10 (11) · 499
DOI: 10.3390/jmmp10110499 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 11.11.2026. Verfasst von Kirill A. Bashmur und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A reduced model of internal rotary burnishing couples Hertz–expanding-cavity indentation, Euler–Bernoulli crown bending and loading-chain compression through incremental equilibrium from preload. The resulting residual geometry supplies an in-service contact model. In the reference numerical case with a steel crown and an Al–Cu–Mg tube, 20 μm of additional travel from a 20 N preload gives a total force of 408 N, a maximum penetration of 14.1 μm and an edge-to-centre residual sag of 2.70 μm. Indentation, crown bending and loading-chain compression account for 60.9%, 19.7% and 19.4% of this travel, respectively. The two process-derived cells have texture area fractions of 0.03–0.04 and specific cavity volumes of 0.05–0.07 μm. In a separate 1×1 mm periodic-contact benchmark at 5 MPa, the directly integrated rough-land approach is 1.07 μm, compared with a smooth-contact rigid-plane offset of 2.85 nm. Global sensitivity identifies yield strength as the leading input for residual sag (total-order Sobol index STi=0.57); total-force sensitivity is greatest for preload, followed by crown thickness. With the Hertz–expanding-cavity transition markers fixed, the prescribed calibration-uncertainty distributions give Monte Carlo 5th–95th percentile intervals of 2.2–3.3 μm for residual sag and 387–426 N for total force. Variance reductions obtained by fixing individual inputs in this calibration scenario identify yield strength as the main calibration priority for residual geometry, and loading-chain stiffness and local crown thickness as priorities for force transfer.
Zitieren
APA
Bashmur, K. A., Zagulyaev, A. V., Nekrasov, I. S., Tsygankova, E. V., & Sviridova, T. N. (2026). Rotary Burnishing of Internal Tube Surfaces with a Preloaded Compliant Crown: A Force–Geometry–Compliance Model and Parametric Sensitivity Analysis. Journal of Manufacturing and Materials Processing, 10(11), 499. https://doi.org/10.3390/jmmp10110499
Vancouver
Bashmur KA, Zagulyaev AV, Nekrasov IS, Tsygankova EV, Sviridova TN. Rotary Burnishing of Internal Tube Surfaces with a Preloaded Compliant Crown: A Force–Geometry–Compliance Model and Parametric Sensitivity Analysis. Journal of Manufacturing and Materials Processing. 2026;10(11):499. doi:10.3390/jmmp10110499
BibTeX
@article{Bashmur2026,
author = {Bashmur, Kirill A. and Zagulyaev, Alexander V. and Nekrasov, Ivan S. and Tsygankova, Elena V. and Sviridova, Tatiana N.},
title = {Rotary Burnishing of Internal Tube Surfaces with a Preloaded Compliant Crown: A Force–Geometry–Compliance Model and Parametric Sensitivity Analysis},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {11},
pages = {499},
doi = {10.3390/jmmp10110499}
}
EUVIMED