Influence of Trifunctional RAFT Chain-Transfer-Agent-Mediated Polymerization Conditions on the Negative-Tone Patterning Behavior of Methacrylate-Based Photoresists
Journal of Manufacturing and Materials Processing · 30.10.2026 · 10 (11) · 460
DOI: 10.3390/jmmp10110460 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 30.10.2026. Verfasst von Yura Choi und 3 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, Ministry of Climate, Energy & Environment, Soonchunhyang University Research Fund.
Abstract (Originalsprache)
Chemically amplified resist performance is governed by the combined effects of polymer structure, molecular characteristics, thermal behavior, and processing conditions. In this study, methacrylate-based photoresist polymers were prepared under different chain-transfer-agent (CTA)-mediated polymerization conditions using a multifunctional three-arm RAFT agent, TMP-CEPA3, while maintaining the same nominal HEMA:TCDMA:MAMA feed composition. HTM CTA 0, HTM CTA 8, and HTM CTA 16 exhibited comparable incorporated monomer compositions, similar weight-average molecular weights, and narrow dispersities, allowing their thermal and lithographic behaviors to be compared without large compositional differences. Thermal analysis showed no monotonic dependence of glass-transition behavior or thermal response on TMP-CEPA3 loading. FT-IR spectroscopy revealed spectral changes after UV exposure and PEB that were consistent with photoacid-mediated chemical changes involving the MAMA-derived acid-labile groups. Negative-tone lithographic evaluation showed a strong dependence on post-exposure baking (PEB) temperature. At 90 °C, all three formulations produced discernible patterns, with HTM CTA 0 and HTM CTA 8 showing slightly clearer pattern definition than HTM CTA 16. Line-pattern evaluation over nominal feature sizes of 10–80 μm likewise showed favorable pattern formation for CTA 0 and CTA 8. Overall, increasing TMP-CEPA3 loading did not systematically improve patterning behavior, indicating that resist behavior is governed by the combined effects of polymerization conditions, polymer characteristics, and lithographic processing parameters.
Förderung
- Korea Institute of Energy Technology Evaluation and Planning
- Ministry of Climate, Energy & Environment
- Soonchunhyang University Research Fund
Zitieren
APA
Choi, Y., Kim, J., Park, E., & Cho, N. (2026). Influence of Trifunctional RAFT Chain-Transfer-Agent-Mediated Polymerization Conditions on the Negative-Tone Patterning Behavior of Methacrylate-Based Photoresists. Journal of Manufacturing and Materials Processing, 10(11), 460. https://doi.org/10.3390/jmmp10110460
Vancouver
Choi Y, Kim J, Park E, Cho N. Influence of Trifunctional RAFT Chain-Transfer-Agent-Mediated Polymerization Conditions on the Negative-Tone Patterning Behavior of Methacrylate-Based Photoresists. Journal of Manufacturing and Materials Processing. 2026;10(11):460. doi:10.3390/jmmp10110460
BibTeX
@article{Choi2026,
author = {Choi, Yura and Kim, Jinyoung and Park, Eunsu and Cho, Namchul},
title = {Influence of Trifunctional RAFT Chain-Transfer-Agent-Mediated Polymerization Conditions on the Negative-Tone Patterning Behavior of Methacrylate-Based Photoresists},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {11},
pages = {460},
doi = {10.3390/jmmp10110460}
}
EUVIMED