EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermomechanical Behavior of Phosphogypsum Composites Reinforced with Olive and Eucalyptus Wood Chips

Rafaa Saaidia, Houcem Ltaeif, Imed Miraoui, Abdallah Bouabidi, Arman Ameen, Lazhar Ayed

Journal of Manufacturing and Materials Processing · 08.09.2026 · 10 (9) · 349

DOI: 10.3390/jmmp10090349 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 08.09.2026. Verfasst von Rafaa Saaidia und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the development of sustainable composite materials based on phosphogypsum (PG), an abundant industrial by-product, reinforced with olive and eucalyptus wood chips. The objective is to valorize waste streams while enhancing the mechanical, thermal, and acoustic performance of the base material for eco-efficient construction applications. Composites were prepared with fiber contents of 5%, 10%, 15%, and 20% and evaluated through standardized experimental tests. Mechanical behavior was assessed via three-point bending tests, revealing a 26% improvement in flexural strength at 15% eucalyptus content. Water absorption increased with fiber content but remained lower in eucalyptus-reinforced composites due to better fiber–matrix cohesion. Thermal conductivity decreased significantly from 5% to 20% fiber content, reaching 0.60 W/m·K at 20% eucalyptus content, indicating enhanced insulation potential. Acoustic tests, performed using an impedance tube in accordance with ISO 10534-2, showed strong frequency-dependent absorption. The 20% olive composite achieved a peak absorption coefficient of 0.78 and an NRC of 0.68, demonstrating excellent sound-damping characteristics. This work introduces a novel integration of two underutilized Mediterranean biomasses into PG matrices and highlights their multifunctional benefits. The resulting composites offer a low-cost, low-carbon solution for thermally and acoustically optimized building components, advancing circular economy principles in the construction sector.

Zitieren

APA

Saaidia, R., Ltaeif, H., Miraoui, I., Bouabidi, A., Ameen, A., & Ayed, L. (2026). Thermomechanical Behavior of Phosphogypsum Composites Reinforced with Olive and Eucalyptus Wood Chips. Journal of Manufacturing and Materials Processing, 10(9), 349. https://doi.org/10.3390/jmmp10090349

Vancouver

Saaidia R, Ltaeif H, Miraoui I, Bouabidi A, Ameen A, Ayed L. Thermomechanical Behavior of Phosphogypsum Composites Reinforced with Olive and Eucalyptus Wood Chips. Journal of Manufacturing and Materials Processing. 2026;10(9):349. doi:10.3390/jmmp10090349

BibTeX
@article{Saaidia2026,
  author = {Saaidia, Rafaa and Ltaeif, Houcem and Miraoui, Imed and Bouabidi, Abdallah and Ameen, Arman and Ayed, Lazhar},
  title = {Thermomechanical Behavior of Phosphogypsum Composites Reinforced with Olive and Eucalyptus Wood Chips},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {9},
  pages = {349},
  doi = {10.3390/jmmp10090349}
}
Kostenlos starten →