Modeling for Thermal Data Correction in Emissivity-Variant Materials: Numerical and Machine Learning Approaches
Journal of Manufacturing and Materials Processing · 31.08.2026 · 10 (9) · 323
DOI: 10.3390/jmmp10090323 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 31.08.2026. Verfasst von Andrea M. Rodríguez und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Infrared thermography is a well-established non-contact technique for surface temperature monitoring across diverse manufacturing and materials processing applications, such as thermal process monitoring, quality inspection, and high-temperature material evaluation; however, its measurement accuracy is affected by emissivity variations in multi-material environments, which distort the relationship between apparent radiometric temperature and true surface temperature. This study presents a sequential thermal correction framework to improve surface temperature estimation in heterogeneous material systems under normal viewing conditions (90° incidence angle). The methodology operates in two stages: first, apparent emissivity is predicted from infrared temperature and material-specific features using regression-based models; second, the estimated emissivity is incorporated into the temperature-correction model to estimate the reference surface temperature, validated against K-type thermocouple measurements. Controlled experiments were conducted on A36 structural steel and alumina ceramic specimens, representing multi-material combinations found in manufacturing environments, over approximately 20 °C to 700 °C. Synchronized thermal imaging and thermocouple data were acquired throughout heating. Polynomial regression and machine learning approaches were evaluated using leave-one-session-out validation. The framework achieved an out-of-session mean absolute error of 9.45 °C, supporting reliable thermal monitoring in manufacturing applications.
Zitieren
APA
Rodríguez, A. M., Keshmiri, M., Butt, S. U., Fleck, B. A., & Qureshi, A. J. (2026). Modeling for Thermal Data Correction in Emissivity-Variant Materials: Numerical and Machine Learning Approaches. Journal of Manufacturing and Materials Processing, 10(9), 323. https://doi.org/10.3390/jmmp10090323
Vancouver
Rodríguez AM, Keshmiri M, Butt SU, Fleck BA, Qureshi AJ. Modeling for Thermal Data Correction in Emissivity-Variant Materials: Numerical and Machine Learning Approaches. Journal of Manufacturing and Materials Processing. 2026;10(9):323. doi:10.3390/jmmp10090323
BibTeX
@article{Rodrguez2026,
author = {Rodríguez, Andrea M. and Keshmiri, Mohammad and Butt, Sajid U. and Fleck, Brian A. and Qureshi, Ahmed J.},
title = {Modeling for Thermal Data Correction in Emissivity-Variant Materials: Numerical and Machine Learning Approaches},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {9},
pages = {323},
doi = {10.3390/jmmp10090323}
}
EUVIMED