EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Reaction Layer Evolution and Material Removal Mechanism in Chemical-Assisted Magnetorheological Finishing of 316L Stainless Steel Capillaries

Yefeng Yang, Zhaoyang Luo, Pavel Lushchyk, Bing Guo, Chunya Wu

Journal of Manufacturing and Materials Processing · 06.08.2026 · 10 (8) · 284

DOI: 10.3390/jmmp10080284 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 06.08.2026. Verfasst von Yefeng Yang und 4 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

316L stainless-steel capillary tubes are important in medical devices, precision fluid transport and micro heat exchangers, but their slender geometry and dense passivation film make inner-surface finishing inefficient. This study proposes a stepwise chemical-assisted magnetorheological finishing (CMRF) process for 316L capillaries. The inner surface was first pretreated with hydrogen peroxide/oxalic acid to form a removable reaction layer, and then finished by magnetorheological abrasives. The effects of the two reagents on material removal and surface integrity were evaluated, and the optimal pretreatment was determined to be 2.25 wt.% oxalic acid and 1.5 wt.% H2O2. Compared with conventional magnetorheological finishing, CMRF increased the material removal rate by approximately 54% and reduced the final inner-surface roughness Sa to 0.116 μm. Characterization results show that hydrogen peroxide and oxalic acid generate a dynamic oxidation–complexation–dissolution–reoxidation cycle, converting the dense passive film into an oxygen-rich, porous, low-crystallinity reaction layer and reducing surface hardness by about 30%. This softened layer promotes preferential abrasive removal instead of direct cutting of the metallic substrate, thereby improving finishing efficiency and surface quality.

Zitieren

APA

Yang, Y., Luo, Z., Lushchyk, P., Guo, B., & Wu, C. (2026). Surface Reaction Layer Evolution and Material Removal Mechanism in Chemical-Assisted Magnetorheological Finishing of 316L Stainless Steel Capillaries. Journal of Manufacturing and Materials Processing, 10(8), 284. https://doi.org/10.3390/jmmp10080284

Vancouver

Yang Y, Luo Z, Lushchyk P, Guo B, Wu C. Surface Reaction Layer Evolution and Material Removal Mechanism in Chemical-Assisted Magnetorheological Finishing of 316L Stainless Steel Capillaries. Journal of Manufacturing and Materials Processing. 2026;10(8):284. doi:10.3390/jmmp10080284

BibTeX
@article{Yang2026,
  author = {Yang, Yefeng and Luo, Zhaoyang and Lushchyk, Pavel and Guo, Bing and Wu, Chunya},
  title = {Surface Reaction Layer Evolution and Material Removal Mechanism in Chemical-Assisted Magnetorheological Finishing of 316L Stainless Steel Capillaries},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {8},
  pages = {284},
  doi = {10.3390/jmmp10080284}
}
Kostenlos starten →