EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Performance Analysis of an Automated Flat Blade Grinding Machine for Wood Processing and Plastic Recycling Industries

John Vera, Santiago López, Carmen Tisalema, Marco Zurita

Journal of Manufacturing and Materials Processing · 08.07.2026 · 10 (7) · 242

DOI: 10.3390/jmmp10070242 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 08.07.2026. Verfasst von John Vera und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad de las Fuerzas Armadas.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design, development, and experimental validation of an automated flat blade grinding machine for the wood processing and plastic recycling industries in Ecuador. The machine was engineered following the VDI 2221/2222/2225 design methodology, integrating SolidWorks-based 3D modeling and ANSYS finite element analysis (FEA) to validate critical structural components. The selected configuration includes a Type 6 alumina grinding wheel (38A-60-K-VS), a mechanical clamping system, cutting fluid cooling, and a hardwired electromechanical control system that does not require a programmable logic controller (PLC). FEA results confirmed adequate safety factors (ηs > 16; ηf > 14) for the ACME 3/4–8 power screw under operational loads. Experimental testing on blade specimens (thickness: 3 mm; length: 70 mm; steel up to 60 HRC) demonstrated that four grinding passes at a 45° inclination angle reduced mean surface roughness (Ra) from 5.39 ± 1.83 µm (used blades) to 0.162 ± 0.092 µm, achieving values comparable to new blades (Ra = 0.601 ± 0.153 µm): a point-estimate reduction of 97% in mean Ra relative to the used-blade condition. The automated process reduced average grinding time by approximately 30% compared to manual methods, while maintaining noise levels within the 85 dB occupational exposure limit. Operator satisfaction surveys rated the system above 4.5/5.0 across all ergonomic and usability criteria. These results validate the proposed machine as a cost-effective, locally manufacturable solution to standardize blade maintenance in small and medium enterprises (SMEs) across Latin America.

Förderung

  • Universidad de las Fuerzas Armadas

Zitieren

APA

Vera, J., López, S., Tisalema, C., & Zurita, M. (2026). Development and Performance Analysis of an Automated Flat Blade Grinding Machine for Wood Processing and Plastic Recycling Industries. Journal of Manufacturing and Materials Processing, 10(7), 242. https://doi.org/10.3390/jmmp10070242

Vancouver

Vera J, López S, Tisalema C, Zurita M. Development and Performance Analysis of an Automated Flat Blade Grinding Machine for Wood Processing and Plastic Recycling Industries. Journal of Manufacturing and Materials Processing. 2026;10(7):242. doi:10.3390/jmmp10070242

BibTeX
@article{Vera2026,
  author = {Vera, John and López, Santiago and Tisalema, Carmen and Zurita, Marco},
  title = {Development and Performance Analysis of an Automated Flat Blade Grinding Machine for Wood Processing and Plastic Recycling Industries},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {7},
  pages = {242},
  doi = {10.3390/jmmp10070242}
}
Kostenlos starten →