EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Conductive Nanocomposite Filaments from Reused Selective Laser Sintering Powder for Fused Filament Fabrication

Cátia S. Silva, Ana C. Lopes, Álvaro M. Sampaio, António J. Pontes

Journal of Manufacturing and Materials Processing · 04.07.2026 · 10 (7) · 236

DOI: 10.3390/jmmp10070236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 04.07.2026. Verfasst von Cátia S. Silva und 3 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation for Science and Technology, Recovery and Resilience Plan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In polymer selective laser sintering (SLS), powder acts as a support material during additive manufacturing, generating significant amounts of un-sintered powder exposed to prolonged thermal cycles. Although partial reuse with virgin powder is common practice, material degradation eventually renders the powder unsuitable for further SLS processing. This study investigates a sustainable approach for valorising SLS waste powder through its conversion into filament feedstock for fused filament fabrication (FFF). Polyamide 12 filaments containing 0, 2, 3, and 4 wt.% multi-walled carbon nanotubes (MWCNTs) were produced by twin-screw extrusion to tailor the electrical conductivity of the polymer matrix. The filaments were processed by FFF to manufacture specimens for thermal, mechanical, and electrical characterization. Differential scanning calorimetry revealed the influence of reprocessing on the thermal behaviour of the reused material and resulting filaments, while thermogravimetric analysis demonstrated improved thermal stability with increasing MWCNT content. Tensile testing showed increased Young’s modulus (up to 9.4%), despite an initial drop, and tensile stress at break (up to 56.3%) with increasing nanofiller concentration. In addition, distinct electrostatic-discharge (ESD) protection ranges were achieved depending on the MWCNT loading. The results demonstrate the potential of reused SLS powder as a sustainable feedstock for functional AM materials suitable for ESD-sensitive applications.

Förderung

  • Foundation for Science and Technology
  • Recovery and Resilience Plan

Zitieren

APA

Silva, C. S., Lopes, A. C., Sampaio, Á. M., & Pontes, A. J. (2026). Development of Conductive Nanocomposite Filaments from Reused Selective Laser Sintering Powder for Fused Filament Fabrication. Journal of Manufacturing and Materials Processing, 10(7), 236. https://doi.org/10.3390/jmmp10070236

Vancouver

Silva CS, Lopes AC, Sampaio ÁM, Pontes AJ. Development of Conductive Nanocomposite Filaments from Reused Selective Laser Sintering Powder for Fused Filament Fabrication. Journal of Manufacturing and Materials Processing. 2026;10(7):236. doi:10.3390/jmmp10070236

BibTeX
@article{Silva2026,
  author = {Silva, Cátia S. and Lopes, Ana C. and Sampaio, Álvaro M. and Pontes, António J.},
  title = {Development of Conductive Nanocomposite Filaments from Reused Selective Laser Sintering Powder for Fused Filament Fabrication},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {7},
  pages = {236},
  doi = {10.3390/jmmp10070236}
}
Kostenlos starten →