EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Behaviour of Tube Fit Joints in EV Battery Systems: The Role of Material Selection

Vasco P. Henriques, Mohammad Mehdi Kasaei, Ricardo J. C. Carbas, Eduardo A. S. Marques, Lucas F. M. da Silva

Journal of Manufacturing and Materials Processing · 30.06.2026 · 10 (7) · 228

DOI: 10.3390/jmmp10070228 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 30.06.2026. Verfasst von Vasco P. Henriques und 4 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, R&D Consortium on Automotive Battery Pack Manufacturing, led by INEGI, Individual Scientific Employment Stimulus.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tube-fit joining is a promising heat-free solution for busbar-to-prismatic cell terminal interconnections, offering rapid disassembly for repair, reuse, and recycling. This study experimentally investigates the mechanical behaviour of tube-fit joints under pull-out and shear loading, considering different joining forces and busbar–terminal material combinations. Increasing the joining force from 10 to 16 kN enhanced connector deformation and mechanical interlocking, resulting in a pronounced improvement in pull-out performance but only a limited change in shear capacity. A joining force of 13 kN provided the most suitable balance between mechanical performance and damage-free disassembly. Under pull-out loading, the response was primarily governed by the busbar material: copper busbars produced higher peak loads and larger displacements, whereas aluminium busbars exhibited stiffer responses and shorter pull-out strokes. Under shear loading, the different material combinations showed comparable peak loads and a predominantly connector-driven failure mechanism, indicating that shear capacity was mainly controlled by the connector. Increasing the aluminium busbar thickness enhanced joint stiffness and shear load capacity without changing the governing failure mechanism. Overall, this work provides new insights into the interplay between material selection and process parameters in tube fit joining, offering valuable guidance for the design of robust, disassemblable interconnections in next-generation EV battery systems.

Förderung

  • Fundação para a Ciência e Tecnologia
  • R&D Consortium on Automotive Battery Pack Manufacturing, led by INEGI
  • Individual Scientific Employment Stimulus

Zitieren

APA

Henriques, V. P., Kasaei, M. M., Carbas, R. J. C., Marques, E. A. S., & Silva, L. F. M. D. (2026). Mechanical Behaviour of Tube Fit Joints in EV Battery Systems: The Role of Material Selection. Journal of Manufacturing and Materials Processing, 10(7), 228. https://doi.org/10.3390/jmmp10070228

Vancouver

Henriques VP, Kasaei MM, Carbas RJC, Marques EAS, Silva LFMD. Mechanical Behaviour of Tube Fit Joints in EV Battery Systems: The Role of Material Selection. Journal of Manufacturing and Materials Processing. 2026;10(7):228. doi:10.3390/jmmp10070228

BibTeX
@article{Henriques2026,
  author = {Henriques, Vasco P. and Kasaei, Mohammad Mehdi and Carbas, Ricardo J. C. and Marques, Eduardo A. S. and Silva, Lucas F. M. da},
  title = {Mechanical Behaviour of Tube Fit Joints in EV Battery Systems: The Role of Material Selection},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {7},
  pages = {228},
  doi = {10.3390/jmmp10070228}
}
Kostenlos starten →