EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D FFF-Type Printer Upgrade for the Use of Viscous-Filled Polymeric Materials

Karel Dvořák, Jana Dvořáková, Michal Bílek, Lucie Zárybnická

Journal of Manufacturing and Materials Processing · 27.06.2026 · 10 (7) · 222

DOI: 10.3390/jmmp10070222 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 27.06.2026. Verfasst von Karel Dvořák und 3 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: College of Polytechnics Jihlava.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, there has been a significant expansion of additive technologies, especially Fused Filament Fabrication (FFF). This article aims to upgrade a commercial 3D printer to develop viscous polymeric materials, as this option is not currently available. The FFF method is primarily used with thermoplastics and elastomers in filament form. However, materials derived from various water-soluble acrylates offer significant potential, with advantages including environmental friendliness and desirable mechanical and visual properties. The possibility of using a viscous polymer as a carrier for metal material prior to sintering is also a significant factor. The aim of the text is to present the preparation of a 3D printer suitable for printing the above materials. The main requirement was to modify the selected printer with minimal interference with HW and SW. We mainly focused on adjusting the print head. A new prototype for the printing of viscous polymeric materials was visualized. Furthermore, the individual components were designed and printed; a functional system capable of processing these materials was assembled.

Förderung

  • College of Polytechnics Jihlava

Zitieren

APA

Dvořák, K., Dvořáková, J., Bílek, M., & Zárybnická, L. (2026). 3D FFF-Type Printer Upgrade for the Use of Viscous-Filled Polymeric Materials. Journal of Manufacturing and Materials Processing, 10(7), 222. https://doi.org/10.3390/jmmp10070222

Vancouver

Dvořák K, Dvořáková J, Bílek M, Zárybnická L. 3D FFF-Type Printer Upgrade for the Use of Viscous-Filled Polymeric Materials. Journal of Manufacturing and Materials Processing. 2026;10(7):222. doi:10.3390/jmmp10070222

BibTeX
@article{Dvok2026,
  author = {Dvořák, Karel and Dvořáková, Jana and Bílek, Michal and Zárybnická, Lucie},
  title = {3D FFF-Type Printer Upgrade for the Use of Viscous-Filled Polymeric Materials},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {7},
  pages = {222},
  doi = {10.3390/jmmp10070222}
}
Kostenlos starten →