EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Computational Efficiency of a GPU-Resident Integrated Execution Pipeline for Explicit Large-Deformation Finite Element Analysis

Honglae Kim, Seokmoo Hong, Naksoo Kim

Journal of Manufacturing and Materials Processing · 03.06.2026 · 10 (6) · 197

DOI: 10.3390/jmmp10060197 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 03.06.2026. Verfasst von Honglae Kim und 2 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We describe a GPU-resident execution pipeline for explicit large-deformation finite element analysis in which every stage of the timestep—internal force evaluation, contact processing, nodal update, time integration, and minimum edge-length reduction—operates on arrays that remain in device memory, so per-step bulk transfers across PCIe are avoided. Contact is handled on the device through a shared-memory brute-force proximity search with warp-ballot stream compaction. We exercise the solver on a hemisphere compression benchmark at six mesh resolutions (83 K–1.89 M elements). On an NVIDIA L40, per-step speedups over a single CPU core range from about 99× to 138×, increasing with problem size and approaching a plateau near 137× for the largest meshes (above roughly 1 M elements); the contact-enabled configuration adds a net ON/OFF overhead of +13% to +21% to the step time. Against LS-DYNA running in SMP mode on the same problem, the proposed solver is roughly 94× faster than the best 8-core configuration, a margin consistent with the multicore saturation observed in the SMP measurements. The remaining limitations—single-GPU execution, FP32 arithmetic, and rigid-body contact search without a BVH broad phase—are identified as specific targets for multi-GPU, mixed-precision, and scalable-contact extensions.

Zitieren

APA

Kim, H., Hong, S., & Kim, N. (2026). Design and Computational Efficiency of a GPU-Resident Integrated Execution Pipeline for Explicit Large-Deformation Finite Element Analysis. Journal of Manufacturing and Materials Processing, 10(6), 197. https://doi.org/10.3390/jmmp10060197

Vancouver

Kim H, Hong S, Kim N. Design and Computational Efficiency of a GPU-Resident Integrated Execution Pipeline for Explicit Large-Deformation Finite Element Analysis. Journal of Manufacturing and Materials Processing. 2026;10(6):197. doi:10.3390/jmmp10060197

BibTeX
@article{Kim2026,
  author = {Kim, Honglae and Hong, Seokmoo and Kim, Naksoo},
  title = {Design and Computational Efficiency of a GPU-Resident Integrated Execution Pipeline for Explicit Large-Deformation Finite Element Analysis},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {6},
  pages = {197},
  doi = {10.3390/jmmp10060197}
}
Kostenlos starten →