Soil–Cement Mixtures with Fiber Reinforcement in 3D Printing: Challenges and Opportunities for Sustainable Construction
Journal of Manufacturing and Materials Processing · 29.05.2026 · 10 (6) · 190
DOI: 10.3390/jmmp10060190 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 29.05.2026. Verfasst von Juan D. Trujillo und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 147 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MINCIENCIAS.
Abstract (Originalsprache)
Additive manufacturing with soil–cement mixtures is emerging as a disruptive approach to advancing sustainable manufacturing processes. However, its industrial scalability remains limited by material brittleness and a lack of process standardization. This study presents an integrative literature review that critically evaluates the influence of fiber reinforcement on the 3D printing process and the mechanical performance of soil–cement mixtures within the context of sustainable construction and circular economy principles. The analysis integrates fresh-state rheological behavior with hardened-state performance, showing that an optimized fiber dosage (0.3–0.5% by volume) shifts the failure mode from brittle to quasi-ductile while reducing crack propagation by approximately 60%. Additionally, the study compares various fiber types, including synthetic and natural alternatives. The results show that synthetic fibers used at low dosages (0.5–1.0% by volume) provide the greatest improvements in tensile strength and post-cracking ductility. In contrast, natural fibers, typically used at higher dosages (8.0–13.0% by volume), mainly improve toughness and thermal performance, with more limited gains in strength. The review also identifies key gaps in the existing literature, such as a lack of standardized protocols for measuring process parameters and the need for studies that address long-term durability and comprehensive lifecycle assessments. These findings outline a clear research roadmap to support the consolidation of reinforced soil–cement as a resilient and sustainable material for next-generation additive manufacturing.
Förderung
- MINCIENCIAS
Zitieren
APA
Trujillo, J. D., Villamizar, S., & Gomez, D. (2026). Soil–Cement Mixtures with Fiber Reinforcement in 3D Printing: Challenges and Opportunities for Sustainable Construction. Journal of Manufacturing and Materials Processing, 10(6), 190. https://doi.org/10.3390/jmmp10060190
Vancouver
Trujillo JD, Villamizar S, Gomez D. Soil–Cement Mixtures with Fiber Reinforcement in 3D Printing: Challenges and Opportunities for Sustainable Construction. Journal of Manufacturing and Materials Processing. 2026;10(6):190. doi:10.3390/jmmp10060190
BibTeX
@article{Trujillo2026,
author = {Trujillo, Juan D. and Villamizar, Sandra and Gomez, Daniel},
title = {Soil–Cement Mixtures with Fiber Reinforcement in 3D Printing: Challenges and Opportunities for Sustainable Construction},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {6},
pages = {190},
doi = {10.3390/jmmp10060190}
}
EUVIMED