Effect of Aluminum Powder Agglomeration on the Foaming of Al-TiH2 Bulk Foamable Precursors
Journal of Manufacturing and Materials Processing · 16.05.2026 · 10 (5) · 176
DOI: 10.3390/jmmp10050176 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 16.05.2026. Verfasst von Dominic Malanga und 2 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The powder metallurgy route (PM route) for producing aluminum closed-cell foams has recently attracted significant scientific and industrial interest. The process involves mixing a blowing agent powder (e.g., TiH2) with aluminum powder, then compacting the mixture to produce a high-density bulk foamable precursor (BFP). The BFP is then heated above the melting point of aluminum, where the hydrogen released from TiH2 particles forms bubbles in the molten aluminum, which become closed pores (cells) upon solidification. Despite metal powder agglomeration being an important factor in powder metallurgy research that can significantly influence processing, it has surprisingly received little to no attention in the powder-based foaming of metals. To the best of our knowledge, this paper is the first to address aluminum powder agglomeration within the context of powder-based metallic foams. Results show that significant aluminum powder agglomeration not only leads to an inhomogeneous distribution of the TiH2 particles within the BFP, but also to the formation of locally higher than nominal concentrations of TiH2 particle-rich regions, which greatly influence foaming characteristics. The work, for the first time, highlights the need to seriously consider metal-powder agglomeration (even partial agglomeration) in future foaming research via the PM route, and its effect on foaming characteristics.
Zitieren
APA
Malanga, D., Osuna, O., & Morsi, K. (2026). Effect of Aluminum Powder Agglomeration on the Foaming of Al-TiH2 Bulk Foamable Precursors. Journal of Manufacturing and Materials Processing, 10(5), 176. https://doi.org/10.3390/jmmp10050176
Vancouver
Malanga D, Osuna O, Morsi K. Effect of Aluminum Powder Agglomeration on the Foaming of Al-TiH2 Bulk Foamable Precursors. Journal of Manufacturing and Materials Processing. 2026;10(5):176. doi:10.3390/jmmp10050176
BibTeX
@article{Malanga2026,
author = {Malanga, Dominic and Osuna, Oscar and Morsi, K.},
title = {Effect of Aluminum Powder Agglomeration on the Foaming of Al-TiH2 Bulk Foamable Precursors},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {5},
pages = {176},
doi = {10.3390/jmmp10050176}
}
EUVIMED