Tool Wear and Machinability Assessment of Ti-6Al-4V with Cemented Carbide Tools During Large Overhang Milling with Varying Shank Lengths
Journal of Manufacturing and Materials Processing · 05.05.2026 · 10 (5) · 162
DOI: 10.3390/jmmp10050162 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 05.05.2026. Verfasst von Aisheng Jiang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shandong Provincial Natural Science Foundation, Shandong Provincial Natural Science Foundation for Excellent Young Scientists Fund Program.
Abstract (Originalsprache)
Large overhang milling cutters face challenges, including poor cutting stability and surface quality when machining deep-cavity parts in aerospace and other industries. The combined interactions between overhang and process parameters significantly influence machining performance and the tool wear mechanism. In this study, the coupled effects of tool overhang length and feed per tooth on milling force, surface topography, chip morphology, and tool wear mechanism were systematically investigated under typical large overhang conditions. The tool stiffness decreased with increasing overhangs; the feed force decreased by approximately 32.4%~49.48%; and the chip morphology changed from continuous bands to fractures. The feed force increased by approximately 25.11%~67.34% with increasing the feed per tooth, resulting in reduced surface quality and accelerated tool wear. The novelty of this work lies in quantitatively revealing the coupling mechanism between overhang length and feed rate in large overhang milling, providing a theoretical basis for process optimization. The findings are directly applicable to the optimization of machining parameters for deep-cavity components such as aero-engine casings and optical mold cavities, where tool overhang is a critical factor affecting productivity and surface integrity. This study provides a theoretical foundation and experimental reference for optimizing process parameters when milling titanium alloy with long-overhang milling cutters.
Förderung
- National Natural Science Foundation of China
- Shandong Provincial Natural Science Foundation
- Shandong Provincial Natural Science Foundation for Excellent Young Scientists Fund Program
- Young Taishan Scholars Program of Shandong Province
- Tribology Science Fund of the State Key Laboratory of Tribology in Advanced Equipment
- Shandong Postdoctoral Science Foundation
- Outstanding Young and Middle-aged Scholars of Shandong University
Zitieren
APA
Jiang, A., Guo, F., Wang, Y., Zhang, S., Wang, T., Yu, H., Liang, X., & Liu, Z. (2026). Tool Wear and Machinability Assessment of Ti-6Al-4V with Cemented Carbide Tools During Large Overhang Milling with Varying Shank Lengths. Journal of Manufacturing and Materials Processing, 10(5), 162. https://doi.org/10.3390/jmmp10050162
Vancouver
Jiang A, Guo F, Wang Y, Zhang S, Wang T, Yu H, et al. Tool Wear and Machinability Assessment of Ti-6Al-4V with Cemented Carbide Tools During Large Overhang Milling with Varying Shank Lengths. Journal of Manufacturing and Materials Processing. 2026;10(5):162. doi:10.3390/jmmp10050162
BibTeX
@article{Jiang2026,
author = {Jiang, Aisheng and Guo, Feng and Wang, Yuzhong and Zhang, Shibo and Wang, Tianyu and Yu, Haiqiang and Liang, Xiaoliang and Liu, Zhanqiang},
title = {Tool Wear and Machinability Assessment of Ti-6Al-4V with Cemented Carbide Tools During Large Overhang Milling with Varying Shank Lengths},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {5},
pages = {162},
doi = {10.3390/jmmp10050162}
}
EUVIMED