EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Real-Time Pose Correction of an Industrial Robot for Machining Using Photogrammetry

Roberto Alonso, Beñat Iñigo, Ibai Leizea, Pedro González de Alaiza Martínez, Jon Lopez de Zubiria, Jokin Munoa

Journal of Manufacturing and Materials Processing · 23.04.2026 · 10 (5) · 147

DOI: 10.3390/jmmp10050147 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 23.04.2026. Verfasst von Roberto Alonso und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A photogrammetry-based error compensation solution, comprising calibration, positioning compensation and accuracy validation methodologies, is presented to the aerospace sector, able to assist industrial robots in manufacturing new composite materials, offering versatility and reconfigurability at a lower cost than that resulting from the currently used milling machines. Against a ground truth measured by a laser tracker, it has boosted, in real time, the accuracy level from ±0.685 to ±0.203 mm, on average, and from ±1.621 to ±0.498 mm at peak, following the ISO 9283 standard, and from ±0.534 to ±0.080 mm, on average, and from ±1.804 to ±0.456 mm at peak, with a real part in a large volume under industrial operating conditions, taking into account occlusions and showing robustness against the impact of the payload, the waviness, and the backlash.

Förderung

  • European Union

Zitieren

APA

Alonso, R., Iñigo, B., Leizea, I., Martínez, P. G. D. A., Zubiria, J. L. D., & Munoa, J. (2026). Real-Time Pose Correction of an Industrial Robot for Machining Using Photogrammetry. Journal of Manufacturing and Materials Processing, 10(5), 147. https://doi.org/10.3390/jmmp10050147

Vancouver

Alonso R, Iñigo B, Leizea I, Martínez PGDA, Zubiria JLD, Munoa J. Real-Time Pose Correction of an Industrial Robot for Machining Using Photogrammetry. Journal of Manufacturing and Materials Processing. 2026;10(5):147. doi:10.3390/jmmp10050147

BibTeX
@article{Alonso2026,
  author = {Alonso, Roberto and Iñigo, Beñat and Leizea, Ibai and Martínez, Pedro González de Alaiza and Zubiria, Jon Lopez de and Munoa, Jokin},
  title = {Real-Time Pose Correction of an Industrial Robot for Machining Using Photogrammetry},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {5},
  pages = {147},
  doi = {10.3390/jmmp10050147}
}
Kostenlos starten →