Data-Driven Thermal Optimization of Drill Geometry in Titanium Machining: FEM Modeling and Experimental Insights
Journal of Manufacturing and Materials Processing · 21.03.2026 · 10 (3) · 109
DOI: 10.3390/jmmp10030109 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 21.03.2026. Verfasst von Ahmet Atak und 5 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The current study offers a deeper understanding of the thermal behavior of AISI 420 stainless-steel drill bits during titanium alloy machining. It utilizes non-linear simulations with the finite element method (FEM) to analyze heat generation, accumulation, and dissipation. The FEM formulation displays the time-dependent temperatures for the tool and hole during the drilling process. The simulation was examined during drilling and subsequent stages, up to room temperature. The study explored a wide range of drill bit lengths (60–160 mm) and tool diameters (2–10 mm). Significant convergence of 4.1% was achieved when compared to infrared thermography data. Furthermore, increasing the tool length beyond 120 mm did not significantly increase the thermal effect. Moreover, increasing the tool diameter up to 10 mm also did not significantly increase the thermal efficiency compared to tool diameters between 2 and 5 mm based on a constant tool length. An exploratory data analysis (EDA) heatmap correlation matrix was used to examine the most efficient variables and the optimum tool geometry. The results obtained provide a clear understanding of the optimal geometry choice for steel drilling tools when used in drilling titanium alloys.
Zitieren
APA
Atak, A., Khazal, H., Khudhair, B. K., Al-Sabur, R., Khalaf, H. I., & Alhafadhi, M. (2026). Data-Driven Thermal Optimization of Drill Geometry in Titanium Machining: FEM Modeling and Experimental Insights. Journal of Manufacturing and Materials Processing, 10(3), 109. https://doi.org/10.3390/jmmp10030109
Vancouver
Atak A, Khazal H, Khudhair BK, Al-Sabur R, Khalaf HI, Alhafadhi M. Data-Driven Thermal Optimization of Drill Geometry in Titanium Machining: FEM Modeling and Experimental Insights. Journal of Manufacturing and Materials Processing. 2026;10(3):109. doi:10.3390/jmmp10030109
BibTeX
@article{Atak2026,
author = {Atak, Ahmet and Khazal, Haider and Khudhair, Baydaa K. and Al-Sabur, Raheem and Khalaf, Hassanein I. and Alhafadhi, Mahmood},
title = {Data-Driven Thermal Optimization of Drill Geometry in Titanium Machining: FEM Modeling and Experimental Insights},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {3},
pages = {109},
doi = {10.3390/jmmp10030109}
}
EUVIMED