EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Geometry-Dependent Mechanical Performance of Additively Manufactured Metal–Polymer Hybrid Joints with Lattice-Based Transition Zones

Alexander Walzl, Konstantin Prabitz

Journal of Manufacturing and Materials Processing · 17.03.2026 · 10 (3) · 103

DOI: 10.3390/jmmp10030103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 17.03.2026. Verfasst von Alexander Walzl und 1 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Promotion Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal–polymer hybrid joints are gaining importance as they combine high structural rigidity with a low weight. Additive manufacturing processes such as the laser powder bed fusion process (L-PBF) enable the production of complex metallic lattice structures that allow for form-fitting force transmission between the metal and polymer as mechanical interlock elements. In this work, metal–polymer hybrid compounds with additively manufactured transition zones are systematically investigated and mechanically evaluated. Three different lattice geometries (z4A, z8A, z8V) were fabricated from maraging steel (1.2709) using L-PBF and then hybridised with injection moulding using polypropylene (PP C7069-100NA). Mechanical characterisation was performed by tensile tests according to DIN EN ISO 527, in combination with statistical analyses and an analytical serial three-spring model to determine the homogenised elasticity modulus of the transition zone. The results show significant geometry-related differences in tensile strength, maximum force, and effective stiffness. The A-shaped transition zone geometry (z4A) achieves the highest mechanical performance and up to 82% of the tensile strength of the pure polymer, while the V-shaped transition zone geometry (z8V) has significantly lower load-bearing capacities. Variance analysis shows a dominant geometric influence with effect strength of η2 ≈ 0.99. The analytically predicted stiffness values match the experimental results within 5–10%. This work demonstrates a reproducible, simulation-sparse approach to the analysis and design of metal–polymer hybrid connections.

Förderung

  • Austrian Research Promotion Agency

Zitieren

APA

Walzl, A., & Prabitz, K. (2026). Geometry-Dependent Mechanical Performance of Additively Manufactured Metal–Polymer Hybrid Joints with Lattice-Based Transition Zones. Journal of Manufacturing and Materials Processing, 10(3), 103. https://doi.org/10.3390/jmmp10030103

Vancouver

Walzl A, Prabitz K. Geometry-Dependent Mechanical Performance of Additively Manufactured Metal–Polymer Hybrid Joints with Lattice-Based Transition Zones. Journal of Manufacturing and Materials Processing. 2026;10(3):103. doi:10.3390/jmmp10030103

BibTeX
@article{Walzl2026,
  author = {Walzl, Alexander and Prabitz, Konstantin},
  title = {Geometry-Dependent Mechanical Performance of Additively Manufactured Metal–Polymer Hybrid Joints with Lattice-Based Transition Zones},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {3},
  pages = {103},
  doi = {10.3390/jmmp10030103}
}
Kostenlos starten →