EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Degradation and Long-Term Response Evaluation of Polymeric Components Produced by Additive Manufacturing

Claudia Solek, Jorge Crespo-Sánchez, Sergio Fuentes del Toro, Jorge Ayllón, Mariaenrica Frigione, Ana María Camacho, Juan Rodríguez-Hernández, Alvaro Rodríguez-Prieto

Journal of Manufacturing and Materials Processing · 17.03.2026 · 10 (3) · 102

DOI: 10.3390/jmmp10030102 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 17.03.2026. Verfasst von Claudia Solek und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 292 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Research Agency/Ministry of Science, Innovation and Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) has rapidly evolved from a prototyping tool into an effective method for producing end-use components, thanks to its ability to produce complex, lightweight and customised parts. However, this technique requires a thorough understanding of the long-term behaviour and degradation mechanisms of components, especially when polymers are involved in the printing process. Unlike polymer components manufactured using traditional methods, polymers produced through AM exhibit unique microstructures, anisotropies, and interfacial characteristics due to the layer-by-layer fabrication process. These features can affect how these materials respond to thermal, mechanical and environmental stresses over time. Furthermore, technology-specific processing parameters directly govern porosity distribution, crystallinity evolution, interlayer bonding quality, and residual stress development, all of which are key factors for ensuring long-term performance. This review aims to support researchers in the development of durable additively manufactured polymer components by systematically analysing polymer degradation mechanisms, accelerated ageing and lifetime prediction methodologies. Following a PRISMA-based screening process, approximately 160 international standards relevant to polymer durability in additive manufacturing were selected from an initial corpus of about 620 documents for in-depth analysis. Processing–structure–property relationships specific to the AM processing of polymers, including the commonly used FFF (fused filament fabrication), SLA (stereolithography) and SLS (selective laser sintering), are examined in relation to crucial aspects for long-term structural integrity and degradation behaviour. Finally, limitations within the current normative framework are identified, emphasising the absence of process-aware durability assessment protocols and the need for dedicated standards tailored to additively manufactured polymer components.

Förderung

  • Spanish Research Agency/Ministry of Science, Innovation and Universities

Zitieren

APA

Solek, C., Crespo-Sánchez, J., Toro, S. F. D., Ayllón, J., Frigione, M., Camacho, A. M., Rodríguez-Hernández, J., & Rodríguez-Prieto, A. (2026). Degradation and Long-Term Response Evaluation of Polymeric Components Produced by Additive Manufacturing. Journal of Manufacturing and Materials Processing, 10(3), 102. https://doi.org/10.3390/jmmp10030102

Vancouver

Solek C, Crespo-Sánchez J, Toro SFD, Ayllón J, Frigione M, Camacho AM, et al. Degradation and Long-Term Response Evaluation of Polymeric Components Produced by Additive Manufacturing. Journal of Manufacturing and Materials Processing. 2026;10(3):102. doi:10.3390/jmmp10030102

BibTeX
@article{Solek2026,
  author = {Solek, Claudia and Crespo-Sánchez, Jorge and Toro, Sergio Fuentes del and Ayllón, Jorge and Frigione, Mariaenrica and Camacho, Ana María and Rodríguez-Hernández, Juan and Rodríguez-Prieto, Alvaro},
  title = {Degradation and Long-Term Response Evaluation of Polymeric Components Produced by Additive Manufacturing},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {3},
  pages = {102},
  doi = {10.3390/jmmp10030102}
}
Kostenlos starten →