The Influence of Heat and Holding Time on the Warm Forming of Al–Mg–Si Alloys
Journal of Manufacturing and Materials Processing · 11.03.2026 · 10 (3) · 94
DOI: 10.3390/jmmp10030094 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 11.03.2026. Verfasst von Vasco Simões und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: French Ministry of Higher Education, Portuguese Foundation for Science and Technology.
Abstract (Originalsprache)
Warm forming of heat-treatable aluminium alloys can induce significant changes in their initial heat treatment, affecting both the forming process and the final in-service properties. This work aims to systematically investigate the influence of heat-holding time on the thermo-mechanical behaviour and post-forming properties of Al–Mg–Si alloys (EN AW 6016-T4 and EN AW 6061-T6), with a focus on optimizing process parameters to enhance formability and minimize springback. The study combines uniaxial tensile tests, cylindrical cup forming, hardness measurements, and springback evaluation, at room temperature (RT) and 200 °C, for different heat-holding times. The results show that short heat-holding times improve formability and reduce springback, while longer times promote artificial ageing, increasing strength and hardness but reducing ductility, especially in the EN AW 6016-T4 alloy. The EN AW 6061-T6 alloy exhibits greater thermal stability. The findings provide practical guidelines for industrial warm forming of Al–Mg–Si alloys, highlighting the critical role of heat-holding time in balancing formability, strength, and dimensional accuracy.
Förderung
- French Ministry of Higher Education
- Portuguese Foundation for Science and Technology
Zitieren
APA
Simões, V., Oliveira, M., Laurent, H., & Menezes, L. (2026). The Influence of Heat and Holding Time on the Warm Forming of Al–Mg–Si Alloys. Journal of Manufacturing and Materials Processing, 10(3), 94. https://doi.org/10.3390/jmmp10030094
Vancouver
Simões V, Oliveira M, Laurent H, Menezes L. The Influence of Heat and Holding Time on the Warm Forming of Al–Mg–Si Alloys. Journal of Manufacturing and Materials Processing. 2026;10(3):94. doi:10.3390/jmmp10030094
BibTeX
@article{Simes2026,
author = {Simões, Vasco and Oliveira, Marta and Laurent, Hervé and Menezes, Luis},
title = {The Influence of Heat and Holding Time on the Warm Forming of Al–Mg–Si Alloys},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {3},
pages = {94},
doi = {10.3390/jmmp10030094}
}
EUVIMED