EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Polylactic Acid Polymer as a Substrate in Rectenna for Ambient Radiofrequency Energy Harvesting

Pangsui Usifu Linge, Tony Gerges, Pascal Bevilacqua, Jean-Marc Duchamp, Philippe Benech, Jacques Verdier, Philippe Lombard, Michel Cabrera, Pierre Tsafack, Fabien Mieyeville, Bruno Allard

Journal of Low Power Electronics and Applications · 12.05.2023 · 13 (2) · 34

DOI: 10.3390/jlpea13020034 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Low Power Electronics and Applications, online erschienen am 12.05.2023. Verfasst von Pangsui Usifu Linge und 10 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: IPCEI Nano 2022—INCA.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work details the design and experimental characterization of a 2D rectenna for scavenging radio frequency energy at 2.45 GHz (WiFi band), fabricated on polylactic acid polymer (PLA) using a plastronics approach. PLA is the RF substrate of both antenna and rectifier. The two transmission line (TTL) approach is used to characterize the substrate properties to be considered during design. A linearly polarized patch antenna with microstrip transmission feeding is connected to a single series diode rectifier through a T-matching network. The antenna has simulated and measured gain of 7.6 dB and 7.5 dB, respectively. The rectifier has a measured DC output power of 0.96 μW at an optimal load of 2 kΩ under RF input power of −20 dBm at 2.45 GHz. The power conversion efficiency is 9.6% in the latter conditions for a 54 × 36 mm patch antenna of a 1.5 mm thick PLA substrate obtained from additive manufacturing. The power conversion efficiency reaches a value of 28.75% when the input power is −10 dBm at 2.45 GHz. This corresponds to a peak DC power of 28.75 μW when the optimal load is 1.5 kΩ. The results compare significantly with the ones of a similar rectenna circuit manufactured on preferred RF substrate.

Förderung

  • IPCEI Nano 2022—INCA

Zitieren

APA

Linge, P. U., Gerges, T., Bevilacqua, P., Duchamp, J., Benech, P., Verdier, J., Lombard, P., Cabrera, M., Tsafack, P., Mieyeville, F., & Allard, B. (2023). Evaluation of Polylactic Acid Polymer as a Substrate in Rectenna for Ambient Radiofrequency Energy Harvesting. Journal of Low Power Electronics and Applications, 13(2), 34. https://doi.org/10.3390/jlpea13020034

Vancouver

Linge PU, Gerges T, Bevilacqua P, Duchamp J, Benech P, Verdier J, et al. Evaluation of Polylactic Acid Polymer as a Substrate in Rectenna for Ambient Radiofrequency Energy Harvesting. Journal of Low Power Electronics and Applications. 2023;13(2):34. doi:10.3390/jlpea13020034

BibTeX
@article{Linge2023,
  author = {Linge, Pangsui Usifu and Gerges, Tony and Bevilacqua, Pascal and Duchamp, Jean-Marc and Benech, Philippe and Verdier, Jacques and Lombard, Philippe and Cabrera, Michel and Tsafack, Pierre and Mieyeville, Fabien and Allard, Bruno},
  title = {Evaluation of Polylactic Acid Polymer as a Substrate in Rectenna for Ambient Radiofrequency Energy Harvesting},
  journal = {Journal of Low Power Electronics and Applications},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {34},
  doi = {10.3390/jlpea13020034}
}
Kostenlos starten →