EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bone Mineral Density (BMD) Assessment Using Dual-Energy CT with Different Base Material Pairs (BMPs)

Stefano Piscone, Sara Saccone iD, Paola Milillo, Giorgia Schiraldi iD, Roberta Vinci iD, Luca Macarini, Luca Pio Stoppino iD

Journal of Imaging · 13.07.2025 · 11 (7) · 236

DOI: 10.3390/jimaging11070236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Imaging, online erschienen am 13.07.2025. Verfasst von Stefano Piscone und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Medical and Surgical Sciences, Section of Diagnostic Imaging, University of Foggia, Viale Luigi Pinto n. 1, 71121 Foggia, Italy. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The assessment of bone mineral density (BMD) is essential for osteoporosis diagnosis. Dual-energy X-ray Absorptiometry (DXA) is the current gold standard, but it has limitations in evaluating trabecular bone and is susceptible to different artifacts. In this study we evaluate whether Dual-Energy Computed Tomography (DECT) can be defined as an alternative method for the assessment of BMD in a sample of postmenopausal patients undergoing oncological follow-up. In this study a retrospective analysis was conducted on 41 patients who had both DECT and DXA within six months. BMD values were extracted from DECT using five different base material pairs (BMPs) and compared with DXA measurements at the femoral neck. The calcium–fat pairing showed the strongest correlation with DXA-derived BMD (Spearman’s ρ = 0.797) and excellent reproducibility (ICC = 0.983). There was a strong and significant association between the DXA results and the various BPM measurements. These findings support the possibility of DECT in the precise and opportunistic evaluation of BMD changes when employing particular BMPs. This study showed how this technique can be a useful and effective substitute for conventional DXA, particularly when patients are in oncological follow-up using DECT, minimizing additional radiation exposure.

Schlagwörter

Stichwörter der Autor:innen

Dual-Energy CT (DECT)Dual-energy X-ray Absorptiometry (DXA)base materials pairs (BMPs)bone mineral density (BMD)femoral neck fracturesosteoporosis

Autor:innen und Institutionen

  • Department of Medical and Surgical Sciences, Section of Diagnostic Imaging, University of Foggia, Viale Luigi Pinto n. 1, 71121 Foggia, Italy.
  • Unit of Diagnostic and Interventional Radiology, Department of Radiology, Maggiore Polyclinic Hospital, Foundation IRCCS Ca' Granda, 20122 Milan, Italy.

ORCID-Profile: Sara Saccone, Giorgia Schiraldi, Roberta Vinci, Luca Pio Stoppino

Zitieren

APA

Piscone, S., Saccone, S., Milillo, P., Schiraldi, G., Vinci, R., Macarini, L., & Stoppino, L. P. (2025). Bone Mineral Density (BMD) Assessment Using Dual-Energy CT with Different Base Material Pairs (BMPs). Journal of Imaging, 11(7), 236. https://doi.org/10.3390/jimaging11070236

Vancouver

Piscone S, Saccone S, Milillo P, Schiraldi G, Vinci R, Macarini L, et al. Bone Mineral Density (BMD) Assessment Using Dual-Energy CT with Different Base Material Pairs (BMPs). Journal of Imaging. 2025;11(7):236. doi:10.3390/jimaging11070236

BibTeX
@article{Piscone2025,
  author = {Piscone, Stefano and Saccone, Sara and Milillo, Paola and Schiraldi, Giorgia and Vinci, Roberta and Macarini, Luca and Stoppino, Luca Pio},
  title = {Bone Mineral Density (BMD) Assessment Using Dual-Energy CT with Different Base Material Pairs (BMPs)},
  journal = {Journal of Imaging},
  year = {2025},
  volume = {11},
  number = {7},
  pages = {236},
  doi = {10.3390/jimaging11070236}
}
Kostenlos starten →