EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multidimensional Characterization of Surface Properties and Microbial Biofilm Formation in Commercial Flowable Resin-Based Dental Composites

Lucian Floare iD, Otilia Cornelia Bolos, Ramona Dumitrescu iD, Marioara Nicoleta Caraba, Iasmina-Mădălina Petculescu iD, Carmen Opris iD, Octavia Balean iD, Vanessa Bolchis iD, Bianca Ioana Todor iD, Cristina Elena Savencu, Atena Galuscan, Daniela Jumanca iD

Journal of Functional Biomaterials · 18.08.2026 · 17 (8) · 413

DOI: 10.3390/jfb17080413 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 18.08.2026. Verfasst von Lucian Floare und 11 weiteren Autor:innen. Beteiligte Einrichtung: Translational and Experimental Clinical Research Centre in Oral Health, Clinic of Preventive, Community Dentistry and Oral Health, University of Medi…. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The interaction between restorative materials and microbial biofilms plays an important role in restoration longevity and the development of secondary caries. This study aimed to perform a multidimensional characterization of four commercially available flowable resin-based dental composites by evaluating their surface roughness, Vickers microhardness, surface morphology, and microbial biofilm formation under standardized in vitro conditions. Filtek™ Bulk Fill Flowable Restorative (3M), Tetric EvoFlow (Ivoclar Vivadent), BRILLIANT Flow (Coltene), and G-ænial™ Universal Injectable (GC) were investigated. Surface roughness was determined by contact profilometry, microhardness was assessed using the Vickers method, and microstructural characteristics were analyzed by scanning electron microscopy (SEM). Microbial biofilm biomass formed by Gram-positive bacteria, Gram-negative bacteria, and Candida albicans, including both reference strains and clinical isolates, was quantified using a crystal violet assay to compare material-dependent microbial colonization. G-ænial™ Universal Injectable exhibited the lowest roughness values, whereas BRILLIANT Flow showed the highest microhardness. SEM analysis revealed a more homogeneous surface morphology for Filtek™ Bulk Fill Flowable Restorative and G-ænial™ Universal Injectable, while Tetric EvoFlow and BRILLIANT Flow displayed increased topographical heterogeneity. Although modest differences in biofilm biomass accumulation were observed among the investigated composites (4.37–12.21% relative biomass reduction compared with the control), no material demonstrated a distinct advantage under the experimental conditions. The integrated evaluation of surface roughness, microhardness, surface morphology, and microbial biofilm formation provides a comparative characterization of commercially available flowable resin-based composites and contributes to a better understanding of material–biofilm interactions. These findings may support the future development of multifunctional restorative biomaterials with improved biofilm-modulating properties.

Schlagwörter

Stichwörter der Autor:innen

Candida albicansStreptococcus mutansbiofilmcomposite resinshardnesssurface propertiessurface roughness

Autor:innen und Institutionen

  • Translational and Experimental Clinical Research Centre in Oral Health, Clinic of Preventive, Community Dentistry and Oral Health, University of Medicine and Pharmacy "Victor Babes", 300040 Timisoara, Romania.
  • Clinic of Preventive, Community Dentistry and Oral Health, Department I, University of Medicine and Pharmacy "Victor Babes", Eftimie Murgu Sq. no 2, 300041 Timisoara, Romania.
  • Department of Dento-Facial Aesthetics, Faculty of Dental Medicine, University of Medicine and Pharmacy "Victor Babes", 300041 Timisoara, Romania.
  • Department of Cellular and Molecular Biology, Faculty of Medicine, University of Medicine and Pharmacy "Victor Babes", 300041 Timisoara, Romania.
  • ANAPATMOL Research Center, University of Medicine and Pharmacy "Victor Babes", 300041 Timisoara, Romania.
  • Department of Materials Engineering and Manufacturing, Faculty of Mechanics, Politehnica University, 300222 Timisoara, Romania.

ORCID-Profile: Lucian Floare, Ramona Dumitrescu, Iasmina-Mădălina Petculescu, Carmen Opris, Octavia Balean, Vanessa Bolchis, Bianca Ioana Todor, Daniela Jumanca

Zitieren

APA

Floare, L., Bolos, O. C., Dumitrescu, R., Caraba, M. N., Petculescu, I. M., Opris, C., Balean, O., Bolchis, V., Todor, B. I., Savencu, C. E., Galuscan, A., & Jumanca, D. (2026). Multidimensional Characterization of Surface Properties and Microbial Biofilm Formation in Commercial Flowable Resin-Based Dental Composites. Journal of Functional Biomaterials, 17(8), 413. https://doi.org/10.3390/jfb17080413

Vancouver

Floare L, Bolos OC, Dumitrescu R, Caraba MN, Petculescu IM, Opris C, et al. Multidimensional Characterization of Surface Properties and Microbial Biofilm Formation in Commercial Flowable Resin-Based Dental Composites. Journal of Functional Biomaterials. 2026;17(8):413. doi:10.3390/jfb17080413

BibTeX
@article{Floare2026,
  author = {Floare, Lucian and Bolos, Otilia Cornelia and Dumitrescu, Ramona and Caraba, Marioara Nicoleta and Petculescu, Iasmina-Mădălina and Opris, Carmen and Balean, Octavia and Bolchis, Vanessa and Todor, Bianca Ioana and Savencu, Cristina Elena and Galuscan, Atena and Jumanca, Daniela},
  title = {Multidimensional Characterization of Surface Properties and Microbial Biofilm Formation in Commercial Flowable Resin-Based Dental Composites},
  journal = {Journal of Functional Biomaterials},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {413},
  doi = {10.3390/jfb17080413}
}
Kostenlos starten →