EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Core Buildup Composite Resins Bond Strength to Dentin and Microhardness Using Universal Adhesives

Iana Schmitt, Jorge Perdigão iD, Guilherme Carpena Lopes iD

Journal of Functional Biomaterials · 18.08.2026 · 17 (8) · 411

DOI: 10.3390/jfb17080411 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 18.08.2026. Verfasst von Iana Schmitt und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dentistry, Federal University of Santa Catarina (UFSC), Florianópolis 88040, SC, Brazil. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The peer-reviewed literature on the use of universal adhesives (UAs) with core build-up composite resins (CBCRs) is limited. UAs may enhance the polymerization of dual-cured composite resins, leading to increased microhardness due to the “touch-cure” effect. This study compared the dentin bond strengths and microhardness of CBCRs bonded with UAs. A total of 480 bovine incisors were randomly allocated into 20 groups (n = 24). Two dual-cured CBCRs, ParaCore (PrCore) and Gradia Core (GrCore), one light-cured CBCR, Clearfil Photo Core (PhotoCore), and Filtek Z250 (Z250) were evaluated. For the dual-cured CBCRs, the UAs from the respective manufacturers were mixed with a dual-cure activator (Act): One Coat 7 Universal (OC7+Act) and G-Premio Bond (GrPB+Act). Three additional UAs were evaluated: Tokuyama Universal Bond II (TUB), Scotchbond Universal Plus Adhesive (SBUP), and Scotchbond Universal Adhesive with Dual Cure Activator (SBU+Act). Shear bond strength was evaluated after 24 h. Additional specimens were prepared for Vickers microhardness (VHN) evaluation, with or without UA application to the bottom surface. Bond strengths ranged from 7.4 ± 4.0 to 37.0 ± 7.5 MPa. GrCore and PrCore showed higher bond strengths with SBU+Act than with their manufacturer-recommended adhesives. Dual-cured CBCRs exhibited lower dentin bond strengths and lower VHN than the light-cured composite resins, and the touch-cure effect was more effective for GrCore and PhotoCore.

Schlagwörter

Stichwörter der Autor:innen

composite resindentin bondingmicrohardnessshear bond strengthuniversal adhesive

Autor:innen und Institutionen

  • Department of Dentistry, Federal University of Santa Catarina (UFSC), Florianópolis 88040, SC, Brazil.
  • Department of Restorative Sciences, Division of Operative Dentistry, University of Minnesota, Minneapolis, MN 55455, USA.

ORCID-Profile: Jorge Perdigão, Guilherme Carpena Lopes

Zitieren

APA

Schmitt, I., Perdigão, J., & Carpena Lopes, G. (2026). Core Buildup Composite Resins Bond Strength to Dentin and Microhardness Using Universal Adhesives. Journal of Functional Biomaterials, 17(8), 411. https://doi.org/10.3390/jfb17080411

Vancouver

Schmitt I, Perdigão J, Carpena Lopes G. Core Buildup Composite Resins Bond Strength to Dentin and Microhardness Using Universal Adhesives. Journal of Functional Biomaterials. 2026;17(8):411. doi:10.3390/jfb17080411

BibTeX
@article{Schmitt2026,
  author = {Schmitt, Iana and Perdigão, Jorge and Carpena Lopes, Guilherme},
  title = {Core Buildup Composite Resins Bond Strength to Dentin and Microhardness Using Universal Adhesives},
  journal = {Journal of Functional Biomaterials},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {411},
  doi = {10.3390/jfb17080411}
}
Kostenlos starten →