Electrosprayed Chitosan–Calcium Phosphate Microshell Composite Coatings on Silanized Titanium Substrates
Journal of Functional Biomaterials · 17.08.2026 · 17 (8) · 409
DOI: 10.3390/jfb17080409 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 17.08.2026. Verfasst von Andrew Blass Watson und 5 weiteren Autor:innen. Beteiligte Einrichtung: University of Memphis-University of Tennessee Health Science Center Joint Graduate Program in BioMedical Engineering, Biomedical Engineering Departme…. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Chitosan and calcium phosphate (CaP) are attractive bioactive coating materials for titanium (Ti) orthopedic implants, but coating approaches must provide uniform deposition, adequate adhesion, and cytocompatibility. This proof-of-concept study evaluated whether CaP microshells could be incorporated into electrosprayed chitosan coatings bonded to silanized Ti substrates without compromising coating properties. CaP microshells were synthesized using carbon microsphere templates and added to chitosan electrospray solutions at 0.25, 0.5, and 1.0 wt% relative to chitosan. Electrospray parameters were adjusted, and coatings were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, tensile adhesion testing, water contact angle measurements, and W-20-17 bone marrow stromal cell culture. Increasing capillary diameter and reducing pressure enabled stable deposition of uniform composite coatings containing up to 1.0 wt% CaP. CaP microshells were distributed across the coating surfaces and throughout the coating thickness. Silanization significantly increased coating adhesion compared with non-silanized Ti, while CaP incorporation up to 1.0 wt% did not significantly reduce bond strength. All coatings were hydrophilic and supported viable cell attachment and growth over five days. These findings support the feasibility of electrosprayed chitosan–CaP microshell coatings as adhesive, cytocompatible bioactive coating platforms for Ti implant materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- University of Memphis-University of Tennessee Health Science Center Joint Graduate Program in BioMedical Engineering, Biomedical Engineering Department, The University of Memphis, Memphis, TN 38152, USA.
- Department of Chemistry, The University of Memphis, Memphis, TN 38152, USA.
- Mechanical Engineering Department, The University of Memphis, Memphis, TN 38152, USA.
ORCID-Profile: Andrew Blass Watson, Tomoko Fujiwara, Ranganathan Gopalakrishnan, Jessica Amber Jennings, Joel D Bumgardner
Zitieren
APA
Watson, A. B., Atwill, M. J., Fujiwara, T., Gopalakrishnan, R., Jennings, J. A., & Bumgardner, J. D. (2026). Electrosprayed Chitosan–Calcium Phosphate Microshell Composite Coatings on Silanized Titanium Substrates. Journal of Functional Biomaterials, 17(8), 409. https://doi.org/10.3390/jfb17080409
Vancouver
Watson AB, Atwill MJ, Fujiwara T, Gopalakrishnan R, Jennings JA, Bumgardner JD. Electrosprayed Chitosan–Calcium Phosphate Microshell Composite Coatings on Silanized Titanium Substrates. Journal of Functional Biomaterials. 2026;17(8):409. doi:10.3390/jfb17080409
BibTeX
@article{Watson2026,
author = {Watson, Andrew Blass and Atwill, Matthew J and Fujiwara, Tomoko and Gopalakrishnan, Ranganathan and Jennings, Jessica Amber and Bumgardner, Joel D},
title = {Electrosprayed Chitosan–Calcium Phosphate Microshell Composite Coatings on Silanized Titanium Substrates},
journal = {Journal of Functional Biomaterials},
year = {2026},
volume = {17},
number = {8},
pages = {409},
doi = {10.3390/jfb17080409}
}
EUVIMED