EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Nanodiamond Incorporation on the Surface, Mechanical, and Tribological Properties of Glass Ionomer Cement

Magdalena Mrózek iD, Pavel Kejzlar iD, Petr Louda, Danuta Lietz-Kijak, Piotr Skomro, Karolina Jezierska iD, Karolina Rowińska iD, Lidia Szczucka, Kinga Adach, Mateusz Fijałkowski iD, Totka Bakalova iD, Helena Gronwald iD

Journal of Functional Biomaterials · 03.08.2026 · 17 (8) · 382

DOI: 10.3390/jfb17080382 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 03.08.2026. Verfasst von Magdalena Mrózek und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science, Faculty of Mechanical Engineering, Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech Republic. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technical University of Liberec, Institutional Endowment for the Long-Term Conceptual Development of Research Institutes, as provided by the MSMT of the Czech Republic 2026, Pomeranian Medical University in Szczecin.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: Glass ionomer cements (GICs), high-biocompatibility dental materials that release fluoride with a cariostatic and remineralising effect on hard dental tissues, are widely used in many fields of dentistry, including conservative dentistry, pediatric dentistry, prosthodontics, and orthodontics; however, their mechanical performance and wear resistance remain limited. This study investigated the effect of nanodiamond (ND) addition (0.5–4.0 wt.%) on the surface, mechanical, and tribological properties of a conventional self-curing GIC.

Methods

Surface roughness, microhardness, wear resistance, coefficient of friction, and chemical composition were evaluated using confocal microscopy, Vickers microhardness testing, tribological measurements, and EDX analysis.

Results

The incorporation of NDs reduced the coefficient of friction and modified the surface morphology of the cement. The lowest friction coefficient (0.444) was observed for the sample containing 2 wt.% ND. However, ND addition also resulted in an approximately 50 per cent decrease in microhardness and wear resistance compared with the unmodified cement. EDX analysis confirmed that the chemical composition of the GIC matrix remained largely unchanged.

Conclusions

The results indicate that nanodiamonds can improve the tribological behavior of glass ionomer cements, although further optimization of nanoparticle concentration and dispersion is necessary to maintain adequate mechanical properties.

Schlagwörter

Stichwörter der Autor:innen

dental glass ionomer cementmicrohardnessnanodiamondsurface roughnesstribologywear resistance

Autor:innen und Institutionen

  • Department of Materials Science, Faculty of Mechanical Engineering, Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech Republic.
  • Department of Advanced Materials, Institute of Nanomaterials, Advanced Technologies, and Innovation, Technical University of Liberec, Studentská 1402/2, 461 17 Liberec, Czech Republic.
  • Department of Material Science, Polytechnic Faculty, University of Kalisz, 2 W. Bogusławskiego Square, 62-800 Kalisz, Poland.
  • Department of Propaedeutic, Physical Diagnostics and Dental Physiotherapy, Pomeranian Medical University in Szczecin, 72 Powstańców Wielkopolskich Ave., 70-111 Szczecin, Poland.
  • Department of Medical Physics, Pomeranian Medical University in Szczecin, 13 Ku Słońcu Street, 71-073 Szczecin, Poland.
  • Department of Genetics and Pathomorphology, Pomeranian Medical University in Szczecin, 1 Unii Lubelskiej St., 71-252 Szczecin, Poland.

ORCID-Profile: Magdalena Mrózek, Pavel Kejzlar, Karolina Jezierska, Karolina Rowińska, Mateusz Fijałkowski, Totka Bakalova, Helena Gronwald

Förderung

  • Technical University of Liberec
  • Institutional Endowment for the Long-Term Conceptual Development of Research Institutes, as provided by the MSMT of the Czech Republic 2026
  • Pomeranian Medical University in Szczecin

Zitieren

APA

Mrózek, M., Kejzlar, P., Louda, P., Lietz-Kijak, D., Skomro, P., Jezierska, K., Rowińska, K., Szczucka, L., Adach, K., Fijałkowski, M., Bakalova, T., & Gronwald, H. (2026). Effect of Nanodiamond Incorporation on the Surface, Mechanical, and Tribological Properties of Glass Ionomer Cement. Journal of Functional Biomaterials, 17(8), 382. https://doi.org/10.3390/jfb17080382

Vancouver

Mrózek M, Kejzlar P, Louda P, Lietz-Kijak D, Skomro P, Jezierska K, et al. Effect of Nanodiamond Incorporation on the Surface, Mechanical, and Tribological Properties of Glass Ionomer Cement. Journal of Functional Biomaterials. 2026;17(8):382. doi:10.3390/jfb17080382

BibTeX
@article{Mrzek2026,
  author = {Mrózek, Magdalena and Kejzlar, Pavel and Louda, Petr and Lietz-Kijak, Danuta and Skomro, Piotr and Jezierska, Karolina and Rowińska, Karolina and Szczucka, Lidia and Adach, Kinga and Fijałkowski, Mateusz and Bakalova, Totka and Gronwald, Helena},
  title = {Effect of Nanodiamond Incorporation on the Surface, Mechanical, and Tribological Properties of Glass Ionomer Cement},
  journal = {Journal of Functional Biomaterials},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {382},
  doi = {10.3390/jfb17080382}
}
Kostenlos starten →