EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Additive Manufacturing of Biomaterials: Integrated Translational Ecosystems, Process–Structure–Property Interactions and Emerging Paradigms for Next-Generation Biomedical Engineering

André F V Pedroso iD, Luciana Silva, Marta L S Barbosa iD, Wenfeng Ding iD, Biao Zhao, Ning Qian iD, Francisco J G Silva iD

Journal of Functional Biomaterials · 30.07.2026 · 17 (8) · 365

DOI: 10.3390/jfb17080365 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 30.07.2026. Verfasst von André F V Pedroso und 6 weiteren Autor:innen. Beteiligte Einrichtung: CIDEM, ISEP, Polytechnic of Porto, Rua Dr. António Bernardino de Almeida, 4249-015 Porto, Portugal. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 132 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DRIVOLUTION—Transition to the factory of the future, European Structural and Investments Funds.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) has expanded the design space of biomaterials for biomedical engineering, enabling patient-specific geometries, controlled porosity, multi-material constructs and cell-compatible fabrication. However, clinical translation remains constrained by a mismatch between fabrication capability and biological, mechanical and regulatory performance. Unlike reviews focused on individual material families, isolated AM routes or specific applications, this review interprets AM of biomaterials as an integrated biomaterial–process–structure–property–translation ecosystem. It examines how material chemistry, feedstock state, printing route, architecture, post-processing and biological response jointly determine the reliability of acellular and cellular constructs, with particular emphasis on clinically relevant performance, reproducibility and long-term safety. Metallic, ceramic, polymeric, hydrogel-based and composite biomaterials are analysed alongside binder jetting (BJ), directed energy deposition (DED), material extrusion (ME) and jetting (MJ), powder bed fusion (PBF), VAT photopolymerisation and bioprinting. The review identifies recurring challenges across routes, including restricted material–process compatibility, limited prediction of process–structure–property relationships, post-processing-induced changes in biological performance, insufficient standardisation of printability and biofunctionality metrics, incomplete validation of cell-laden and vascularised constructs and weak transfer of laboratory protocols to clinically robust workflows. The main conclusion is that progress will depend less on expanding printable geometries alone and more on integrated optimisation of materials, processing windows, structural fidelity, biological validation, quality assurance and translational readiness. This ecosystem-level perspective provides a framework for evaluating limitations and defining future priorities in AM-based biomaterials for regenerative medicine, implants and precision biomedical engineering.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbiomaterialsbioprintingprocess–structure–property relationshipstissue engineering

Autor:innen und Institutionen

  • CIDEM, ISEP, Polytechnic of Porto, Rua Dr. António Bernardino de Almeida, 4249-015 Porto, Portugal.
  • Department of Mechanical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 400, 4200-465 Porto, Portugal.
  • College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
  • Associate Laboratory for Energy, Transports and Aerospace, LAETA-INEGI, Campus FEUP, Rua Dr. Roberto Frias, 400, 4200-465 Porto, Portugal.

ORCID-Profile: André F V Pedroso, Marta L S Barbosa, Wenfeng Ding, Ning Qian, Francisco J G Silva

Förderung

  • DRIVOLUTION—Transition to the factory of the future
  • European Structural and Investments Funds

Zitieren

APA

Pedroso, A. F. V., Silva, L., Barbosa, M. L. S., Ding, W., Zhao, B., Qian, N., & Silva, F. J. G. (2026). Additive Manufacturing of Biomaterials: Integrated Translational Ecosystems, Process–Structure–Property Interactions and Emerging Paradigms for Next-Generation Biomedical Engineering. Journal of Functional Biomaterials, 17(8), 365. https://doi.org/10.3390/jfb17080365

Vancouver

Pedroso AFV, Silva L, Barbosa MLS, Ding W, Zhao B, Qian N, et al. Additive Manufacturing of Biomaterials: Integrated Translational Ecosystems, Process–Structure–Property Interactions and Emerging Paradigms for Next-Generation Biomedical Engineering. Journal of Functional Biomaterials. 2026;17(8):365. doi:10.3390/jfb17080365

BibTeX
@article{Pedroso2026,
  author = {Pedroso, André F V and Silva, Luciana and Barbosa, Marta L S and Ding, Wenfeng and Zhao, Biao and Qian, Ning and Silva, Francisco J G},
  title = {Additive Manufacturing of Biomaterials: Integrated Translational Ecosystems, Process–Structure–Property Interactions and Emerging Paradigms for Next-Generation Biomedical Engineering},
  journal = {Journal of Functional Biomaterials},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {365},
  doi = {10.3390/jfb17080365}
}
Kostenlos starten →