Sustainable Carboxymethyl Cellulose-Based Foams via Deep Eutectic Solvent Processing for pH-Responsive Drug Delivery
Journal of Functional Biomaterials · 12.07.2026 · 17 (7) · 337
DOI: 10.3390/jfb17070337 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 12.07.2026. Verfasst von Bruno B Ravanello und 4 weiteren Autor:innen. Beteiligte Einrichtung: AlmaScience Colab, Madan Parque, Rua dos Inventores, 2825-182 Caparica, Portugal. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FCT/MCTES, Environmental Fund.
Abstract (Originalsprache)
Carboxymethyl cellulose (CMC)-based materials are widely studied for functional materials and porous platform applications, yet their stability usually requires energy-intensive thermal curing or toxic chemical crosslinkers, which limit process sustainability. In this work, we present a more sustainable approach for the preparation of CMC-based foams using deep eutectic solvents (DES) as multifunctional structuring agents. CMC hydrogels were prepared with different DES at room temperature, followed by freeze-drying to obtain foams. Among the tested DES, choline chloride:oxalic acid (1:1) combined with glycerol produced foams with the most favorable properties, including high water uptake (288.24 ± 3.02% after 1 h) and water stability for 28 days. Morphological analysis revealed a homogeneous and interconnected porous network (32.2 ± 13.3 µm), while compression tests demonstrated good mechanical recovery (93.29 ± 3.12% over 10 cycles). Fourier transform infrared spectroscopy suggests interactions between CMC and DES, especially hydrogen bonds. The foams exhibited pH-dependent behavior, with limited resveratrol release under acidic conditions (22.2 ± 4.0% after 24 h), with significant release at pH 7.4 (85.30 ± 5.75%) and total release at pH 13.0. Drug release kinetics suggest a diffusion-controlled mechanism under acidic pH, transitioning to anomalous transport at higher pH values. This study demonstrates that DES can be used to prepare CMC-based foams, providing a more sustainable route to porous materials. Although biological validation is needed to confirm therapeutic safety, this study provides an initial physicochemical basis for using these matrices as tunable and stimuli-responsive porous materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- AlmaScience Colab, Madan Parque, Rua dos Inventores, 2825-182 Caparica, Portugal.
- CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, Campus da Caparica, 2829-516 Caparica, Portugal.
- CICECO-Aveiro Institute of Materials, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal.
ORCID-Profile: Bruno B Ravanello, Filipe Silva de Matos, Luís Pereira, Nalin Seixas
Förderung
- FCT/MCTES
- Environmental Fund
Zitieren
APA
Ravanello, B. B., Matos, F. S., Navalhas, B. R., Pereira, L., & Seixas, N. (2026). Sustainable Carboxymethyl Cellulose-Based Foams via Deep Eutectic Solvent Processing for pH-Responsive Drug Delivery. Journal of Functional Biomaterials, 17(7), 337. https://doi.org/10.3390/jfb17070337
Vancouver
Ravanello BB, Matos FS, Navalhas BR, Pereira L, Seixas N. Sustainable Carboxymethyl Cellulose-Based Foams via Deep Eutectic Solvent Processing for pH-Responsive Drug Delivery. Journal of Functional Biomaterials. 2026;17(7):337. doi:10.3390/jfb17070337
BibTeX
@article{Ravanello2026,
author = {Ravanello, Bruno B and Matos, Filipe Silva de and Navalhas, Bruna Ramos and Pereira, Luís and Seixas, Nalin},
title = {Sustainable Carboxymethyl Cellulose-Based Foams via Deep Eutectic Solvent Processing for pH-Responsive Drug Delivery},
journal = {Journal of Functional Biomaterials},
year = {2026},
volume = {17},
number = {7},
pages = {337},
doi = {10.3390/jfb17070337}
}
EUVIMED