Cryogenic Foaming of Silk Fibroin Composite for Scaffolds in Bone and Periodontal Regeneration
Journal of Functional Biomaterials · 06.05.2026 · 17 (5) · 230
DOI: 10.3390/jfb17050230 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 06.05.2026. Verfasst von Giuseppe De Giorgio und 8 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials for Electronics and Magnetism, CNR, Parco Area delle Scienze 37A, 43124 Parma, Italy. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Universities and Research, Ministero dell’Università e della Ricerca.
Abstract (Originalsprache)
Bone tissue has a remarkable regenerative capacity; however, advanced strategies are needed to support the repair process for critical-sized defects. While autografts and allografts remain the gold standard, their limitations have stimulated alternative approaches in bone tissue engineering, in search of scaffolds capable of mimicking native bone properties to promote effective regeneration. In this study, silk fibroin (SF)-based composite scaffolds incorporating β-tricalcium phosphate (β-TCP) and poly-ε-caprolactone (PCL) were synthesized using a simple and innovative cryogenic foaming method. The proposed fabrication technique overcomes many limitations of current synthesis methods, such as long processing times, the use of solvents, and reliance on complex, energy-intensive equipment. The composites were characterized using infrared spectroscopy to confirm the incorporation of all three components and their chemical bond arrangements. µ-CT, SEM, and ESEM analyses revealed that SF/β-TCP/PCL scaffolds exhibited great porosity and dynamic interaction with water while preserving pore morphology in wet environments. Swelling behavior, indirect cytotoxicity, and cell proliferation tests recognized the greater performance of SF/β-TCP/PCL scaffolds in promoting long-term cell proliferation, maintaining superior mechanical properties. These findings indicate that the proposed original, simple, and relatively low-cost manufacturing approach enabled the fabrication of scaffolds with excellent mechanical performances, controlled and stable porosity under both dry and physiological-like conditions, and high biocompatibility. The resulting constructs demonstrated promising results for cell proliferation and osteoconductive behavior, supporting their potential suitability as artificial bone substitutes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials for Electronics and Magnetism, CNR, Parco Area delle Scienze 37A, 43124 Parma, Italy.
- Clinical Department of Medical, Surgical and Health Sciences, University of Trieste, 34100 Trieste, Italy.
- Centre of Dental Medicine, Department of Medicine and Surgery, University of Parma, Via Gramsci 14/A, 43126 Parma, Italy.
ORCID-Profile: Giuseppe De Giorgio, Biagio Matera, Katia Rupel, Giuseppe Tarabella, Gianluca Turco, Benedetta Ghezzi, Pasquale D'Angelo
Förderung
- Ministry of Universities and Research
- Ministero dell’Università e della Ricerca
Zitieren
APA
De Giorgio, G., Medagli, B., Matera, B., Rupel, K., Tarabella, G., Turco, G., Manfredi, M., Ghezzi, B., & D'Angelo, P. (2026). Cryogenic Foaming of Silk Fibroin Composite for Scaffolds in Bone and Periodontal Regeneration. Journal of Functional Biomaterials, 17(5), 230. https://doi.org/10.3390/jfb17050230
Vancouver
De Giorgio G, Medagli B, Matera B, Rupel K, Tarabella G, Turco G, et al. Cryogenic Foaming of Silk Fibroin Composite for Scaffolds in Bone and Periodontal Regeneration. Journal of Functional Biomaterials. 2026;17(5):230. doi:10.3390/jfb17050230
BibTeX
@article{DeGiorgio2026,
author = {De Giorgio, Giuseppe and Medagli, Barbara and Matera, Biagio and Rupel, Katia and Tarabella, Giuseppe and Turco, Gianluca and Manfredi, Maddalena and Ghezzi, Benedetta and D'Angelo, Pasquale},
title = {Cryogenic Foaming of Silk Fibroin Composite for Scaffolds in Bone and Periodontal Regeneration},
journal = {Journal of Functional Biomaterials},
year = {2026},
volume = {17},
number = {5},
pages = {230},
doi = {10.3390/jfb17050230}
}
EUVIMED