Sterilization-Induced Property Changes in FDM-Printed Carbon Fiber-Reinforced Polycarbonate for Medical Device Applications
Journal of Functional Biomaterials · 24.03.2026 · 17 (4) · 159
DOI: 10.3390/jfb17040159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 24.03.2026. Verfasst von Abel Remache und 5 weiteren Autor:innen. Beteiligte Einrichtung: Carrera de Ingeniería Mecánica, Facultad de Ingeniería y Ciencias Aplicadas, Universidad Central del Ecuador, Quito EC170125, Ecuador. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CSP VA, Universidad de Las Américas (UDLA), Universidad UTE, Dirección de Investigación of the Universidad Central del Ecuador.
Abstract (Originalsprache)
Fused deposition modeling (FDM) of carbon fiber-reinforced polycarbonate (PC-CF) is increasingly used in medical applications due to its excellent strength-to-weight ratio and adaptability for custom geometries. However, sterilization is a critical step that may compromise the structural integrity of polymer composites. This study investigates the effects of two low-temperature sterilization methods—ethylene oxide (EO) and hydrogen peroxide vapor (HP)—on the mechanical, thermal, and viscoelastic properties of FDM-printed PC-CF parts. Characterization included tensile, impact, and hardness tests; thermomechanical analysis (TMA); and dynamic mechanical analysis (DMA). EO sterilization resulted in approximately 20% reduced elongation at break and lower glass transition temperature, indicating a loss of ductility and thermal stability. HP-treated samples showed reduced stiffness (16% in Young modulus) but increased Tg and reduced thermal expansion, suggesting improved dimensional stability. DMA results confirmed distinct viscoelastic behavior between treatment types. These findings provide evidence for selecting appropriate sterilization protocols for FDM-manufactured PC-CF components used in functional medical devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Carrera de Ingeniería Mecánica, Facultad de Ingeniería y Ciencias Aplicadas, Universidad Central del Ecuador, Quito EC170125, Ecuador.
- Facultad de Ciencias de la Ingeniería e Industrias, Universidad UTE, Quito EC170129, Ecuador.
- Facultad de Arquitectura y Diseño, Universidad de Las Américas UDLA, Quito EC170125, Ecuador.
- Carrera de Diseño Industrial, Facultad de Ingeniería y Ciencias Aplicadas, Universidad Central del Ecuador, Quito EC170125, Ecuador.
ORCID-Profile: Abel Remache, Wilson Pavon, Oscar Jara Vinueza, Josseline Chicaiza, Jorge Mauricio Fuentes, Homero Cadena
Förderung
- CSP VA
- Universidad de Las Américas (UDLA), Universidad UTE
- Dirección de Investigación of the Universidad Central del Ecuador
Zitieren
APA
Remache, A., Pavon, W., Vinueza, O. J., Chicaiza, J., Fuentes, J. M., & Cadena, H. (2026). Sterilization-Induced Property Changes in FDM-Printed Carbon Fiber-Reinforced Polycarbonate for Medical Device Applications. Journal of Functional Biomaterials, 17(4), 159. https://doi.org/10.3390/jfb17040159
Vancouver
Remache A, Pavon W, Vinueza OJ, Chicaiza J, Fuentes JM, Cadena H. Sterilization-Induced Property Changes in FDM-Printed Carbon Fiber-Reinforced Polycarbonate for Medical Device Applications. Journal of Functional Biomaterials. 2026;17(4):159. doi:10.3390/jfb17040159
BibTeX
@article{Remache2026,
author = {Remache, Abel and Pavon, Wilson and Vinueza, Oscar Jara and Chicaiza, Josseline and Fuentes, Jorge Mauricio and Cadena, Homero},
title = {Sterilization-Induced Property Changes in FDM-Printed Carbon Fiber-Reinforced Polycarbonate for Medical Device Applications},
journal = {Journal of Functional Biomaterials},
year = {2026},
volume = {17},
number = {4},
pages = {159},
doi = {10.3390/jfb17040159}
}
EUVIMED