The Effect of Biomechanical Loading Parameters on the Stress and Strain Behavior of Orthodontic Mini-Implants: A Finite Element Study
Journal of Functional Biomaterials · 27.02.2026 · 17 (3) · 114
DOI: 10.3390/jfb17030114 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 27.02.2026. Verfasst von Tinela Panaite und 6 weiteren Autor:innen. Beteiligte Einrichtung: Grigore T. Popa University of Medicine and Pharmacy Iasi, 700259 Iași, Romania. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background/Objectives: This study evaluated the influence of key biomechanical parameters—orthodontic force magnitude, loading direction, and insertion depth—on stress and strain distribution in orthodontic mini-implants using three-dimensional finite element analysis (FEM).
Methods
A three-dimensional model of a titanium orthodontic mini-implant inserted into a mandibular bone segment was developed and analyzed under varying force magnitudes (1–10 N), loading directions (30°, 45°, and 60°), and insertion depths (2–4 mm). Cortical and cancellous bone components were included, and static loading conditions were applied using simplified, linear elastic material assumptions.
Results
Stress and strain levels increased with higher force magnitudes, with implant stresses approaching critical values at loads above 9 N. Cortical bone stresses remained within physiological limits, whereas cancellous bone exceeded the microdamage strain threshold at forces greater than 3 N. A 60° loading direction reduced implant bending and strain, while deeper insertion significantly decreased strain and displacement, indicating improved primary stability.
Conclusions
Within the limits of this computational model, optimal mechanical behavior was observed under 1–3 N forces, a 60° loading direction, and a 2–4 mm insertion depth. Loads above 9 N approached fatigue and interfacial risk. These findings provide computational insight into the biomechanical behavior of orthodontic mini-implants under the modeled conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Grigore T. Popa University of Medicine and Pharmacy Iasi, 700259 Iași, Romania.
ORCID-Profile: Tinela Panaite, Carmen Amititeloaie, Carina Balcos
Zitieren
APA
Panaite, T., Romanec, C. L., Dragomir, B. R., Sîrghie, A., Amititeloaie, C., Balcos, C., & Savin, C. D. N. (2026). The Effect of Biomechanical Loading Parameters on the Stress and Strain Behavior of Orthodontic Mini-Implants: A Finite Element Study. Journal of Functional Biomaterials, 17(3), 114. https://doi.org/10.3390/jfb17030114
Vancouver
Panaite T, Romanec CL, Dragomir BR, Sîrghie A, Amititeloaie C, Balcos C, et al. The Effect of Biomechanical Loading Parameters on the Stress and Strain Behavior of Orthodontic Mini-Implants: A Finite Element Study. Journal of Functional Biomaterials. 2026;17(3):114. doi:10.3390/jfb17030114
BibTeX
@article{Panaite2026,
author = {Panaite, Tinela and Romanec, Cristian Liviu and Dragomir, Bogdan Radu and Sîrghie, Ana and Amititeloaie, Carmen and Balcos, Carina and Savin, Carmen Diana Nicoleta},
title = {The Effect of Biomechanical Loading Parameters on the Stress and Strain Behavior of Orthodontic Mini-Implants: A Finite Element Study},
journal = {Journal of Functional Biomaterials},
year = {2026},
volume = {17},
number = {3},
pages = {114},
doi = {10.3390/jfb17030114}
}
EUVIMED