Three-Dimensional Printing of Calcium Phosphate-Mesoporous Bioactive Glass Scaffolds for Bone Tissue Engineering
Journal of Functional Biomaterials · 16.12.2025 · 16 (12) · 463
DOI: 10.3390/jfb16120463 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 16.12.2025. Verfasst von Ana Beatriz Gomes de Carvalho und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Cariology, Restorative Sciences, and Endodontics, School of Dentistry, University of Michigan, Ann Arbor, MI 48109, USA. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIDCR NIH HHS, National Institutes of Health (NIH/NIDCR), São Paulo Research Foundation (FAPESP).
Abstract (Originalsprache)
Calcium phosphate cements (CPCs) and biomaterials, such as mesoporous bioactive glass (MBG), are critical for bone tissue engineering. This study aimed to 3D-print CPC scaffolds modified with MBG to enhance their osteogenic potential and regenerative ability. MBG powder was synthesized and characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), and nitrogen adsorption–desorption techniques. A commercial CPC ink (hydroxyapatite/α-tricalcium phosphate) was mixed with 5% MBG (w/w; CPC/MBG), and, after rheological assessment, the mixture was used to obtain scaffolds via 3D printing. These scaffolds were then tested for chemical, morphological, and mechanical properties, as well as ion release analysis. Unmodified CPC 3D-printed scaffolds served as controls. Biological experiments, including cell viability, DNA content, cell adhesion/spreading, and osteogenic gene expression, were performed by seeding alveolar bone-derived mesenchymal stem cells onto the scaffolds. Statistics were performed using Student’s t-test and ANOVA with post hoc tests (α = 5%). MBG characterization showed a typical mesoporous structure with aligned microchannels and an amorphous structure. Both formulations released calcium and phosphate ions; however, CPC/MBG also released silicon. Cell viability, adhesion/spreading, and DNA content were significantly greater in CPC/MBG scaffolds compared to CPC (p < 0.05) after 3 and 7 days of culture. Furthermore, CPC/MBG supported increased expression of key osteogenic genes, including collagen (COL1A1), osteocalcin (OCN), and Runt-related transcription factor 2 (RUNX2), after 14 days (p < 0.05). The combination of CPC ink with MBG particles effectively enhances the biocompatibility and osteogenic potential of the scaffold, making it an innovative bioceramic ink formulation for 3D printing personalized scaffolds for bone regeneration.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Cariology, Restorative Sciences, and Endodontics, School of Dentistry, University of Michigan, Ann Arbor, MI 48109, USA.
- Department of Dental Materials and Prosthodontics, São Paulo State University, São José dos Campos 12245-000, SP, Brazil.
- Department of Dental Materials and Prosthodontics, São Paulo State University, Araraquara 14801-385, SP, Brazil.
- Department of Mechanical Engineering, Cleveland State University, Cleveland, OH 44115, USA.
- Institute of Biomaterials, University of Erlangen-Nuremberg, 91085 Erlangen, Germany.
- Institute of Science and Technology, Federal University of São Paulo, São José dos Campos 12231-280, SP, Brazil.
ORCID-Profile: Lais Medeiros Cardoso, Igor Paulino Mendes Soares, Joyce Rodrigues de Souza, Arpita Roy, Prabaha Sikder, Aldo R Boccaccini, Eliandra de Sousa Trichês, Marco C Bottino
Förderung
- NIDCR NIH HHS
- National Institutes of Health (NIH/NIDCR)
- São Paulo Research Foundation (FAPESP)
Zitieren
APA
de Carvalho, A. B. G., Cardoso, L. M., Mendes Soares, I. P., de Souza, J. R., Roy, A., Sikder, P., Boccaccini, A. R., Trichês, E. S., & Bottino, M. C. (2025). Three-Dimensional Printing of Calcium Phosphate-Mesoporous Bioactive Glass Scaffolds for Bone Tissue Engineering. Journal of Functional Biomaterials, 16(12), 463. https://doi.org/10.3390/jfb16120463
Vancouver
de Carvalho ABG, Cardoso LM, Mendes Soares IP, de Souza JR, Roy A, Sikder P, et al. Three-Dimensional Printing of Calcium Phosphate-Mesoporous Bioactive Glass Scaffolds for Bone Tissue Engineering. Journal of Functional Biomaterials. 2025;16(12):463. doi:10.3390/jfb16120463
BibTeX
@article{deCarvalho2025,
author = {de Carvalho, Ana Beatriz Gomes and Cardoso, Lais Medeiros and Mendes Soares, Igor Paulino and de Souza, Joyce Rodrigues and Roy, Arpita and Sikder, Prabaha and Boccaccini, Aldo R and Trichês, Eliandra de Sousa and Bottino, Marco C},
title = {Three-Dimensional Printing of Calcium Phosphate-Mesoporous Bioactive Glass Scaffolds for Bone Tissue Engineering},
journal = {Journal of Functional Biomaterials},
year = {2025},
volume = {16},
number = {12},
pages = {463},
doi = {10.3390/jfb16120463}
}
EUVIMED