EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Dimensional Bioprinting of Regenerative Cartilage Constructs with Directional Ionically Derived Stiffness Gradients

Maryam Hosseini iD, Angeliki Dimaraki iD, Gerjo J V M van Osch iD, Lidy E Fratila-Apachitei iD, Pedro J Díaz-Payno iD, Amir A Zadpoor iD

Journal of Functional Biomaterials · 03.12.2025 · 16 (12) · 451

DOI: 10.3390/jfb16120451 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 03.12.2025. Verfasst von Maryam Hosseini und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomechanical Engineering, Faculty of Mechanical Engineering, Delft University of Technology, 2628 CD Delft, The Netherlands. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Dutch Medical Delta, Dutch Medical Delta project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tissue engineering approaches for cartilage tissue regeneration are expanding to include the complex features of the tissue, such as the biological and mechanical gradients. Many of these approaches are, however, based on the use of multiple biomaterials or concentrations, and crosslinking methods that make it difficult to integrate and control the properties of the resulting scaffolds. In this study, a 3D bioprinted scaffold with a stiffness gradient was fabricated by using a single biomaterial type and concentration combined with a directional ionic crosslinking method. The scaffolds revealed a gradient in stiffness from 39.8 ± 6.6 kPa at the top to 60.6 ± 10.9 kPa at the bottom of the scaffolds. Live/dead analysis of human chondrocytes embedded in the scaffolds showed no negative effects of the stiffness gradient on cell viability over 28 days. The induced stiffness gradient led to a gradient in cell density and sulfated glycosaminoglycan deposition in the bioprinted tissue constructs with enhanced values in the softer top region of the scaffolds as compared to the stiffer bottom part. This study showed a novel method to generate scaffolds with stiffness gradients from a single biomaterial and indicates that such scaffolds could be used to spatially regulate the behavior of chondrocytes and the associated deposition of the cartilage matrix.

Schlagwörter

Stichwörter der Autor:innen

3D bioprintingarticular cartilagehuman chondrocytesstiffness gradienttissue engineering

Autor:innen und Institutionen

  • Department of Biomechanical Engineering, Faculty of Mechanical Engineering, Delft University of Technology, 2628 CD Delft, The Netherlands.
  • Department of Orthopedics and Sports Medicine, Erasmus MC, University Medical Center, 3015 CN Rotterdam, The Netherlands.
  • Department of Otorhinolaryngology, Head and Neck Surgery, Erasmus MC, University Medical Center, 3015 CN Rotterdam, The Netherlands.
  • IMDEA Materials Institute, 28906 Getafe, Madrid, Spain.
  • Department of Orthopedics, Leiden University Medical Center, 2333 ZG Leiden, The Netherlands.

ORCID-Profile: Maryam Hosseini, Angeliki Dimaraki, Gerjo J V M van Osch, Lidy E Fratila-Apachitei, Pedro J Díaz-Payno, Amir A Zadpoor

Förderung

  • Dutch Medical Delta
  • Dutch Medical Delta project

Zitieren

APA

Hosseini, M., Dimaraki, A., van Osch, G. J. V. M., Fratila-Apachitei, L. E., Díaz-Payno, P. J., & Zadpoor, A. A. (2025). Three-Dimensional Bioprinting of Regenerative Cartilage Constructs with Directional Ionically Derived Stiffness Gradients. Journal of Functional Biomaterials, 16(12), 451. https://doi.org/10.3390/jfb16120451

Vancouver

Hosseini M, Dimaraki A, van Osch GJVM, Fratila-Apachitei LE, Díaz-Payno PJ, Zadpoor AA. Three-Dimensional Bioprinting of Regenerative Cartilage Constructs with Directional Ionically Derived Stiffness Gradients. Journal of Functional Biomaterials. 2025;16(12):451. doi:10.3390/jfb16120451

BibTeX
@article{Hosseini2025,
  author = {Hosseini, Maryam and Dimaraki, Angeliki and van Osch, Gerjo J V M and Fratila-Apachitei, Lidy E and Díaz-Payno, Pedro J and Zadpoor, Amir A},
  title = {Three-Dimensional Bioprinting of Regenerative Cartilage Constructs with Directional Ionically Derived Stiffness Gradients},
  journal = {Journal of Functional Biomaterials},
  year = {2025},
  volume = {16},
  number = {12},
  pages = {451},
  doi = {10.3390/jfb16120451}
}
Kostenlos starten →