Experimental Biomechanical Analysis of the Bone-to-Implant Connection in Single-Piece Implants
Journal of Functional Biomaterials · 19.10.2025 · 16 (10) · 393
DOI: 10.3390/jfb16100393 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 19.10.2025. Verfasst von Karina Krawiec und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanics, Materials and Biomedical Engineering, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Smolu…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The mechanical properties of dental implants are critical for their durability. The purpose of this study was to determine the maximum force required to induce full pull-out of a titanium implant from the bone and to characterize the mechanical behavior during this process. First, pull-out tests were performed on monolithic implants embedded in bovine ribs and foam blocks that mimic the mechanical parameters of human bone, allowing a quantitative evaluation of implant–bone interface strength and a comparison of geometric variants. Second, the extraction process was recreated in a three dimensional finite element model incorporating nonlinear interface contact and parameterization, enabling the reproduction of load–displacement curves; the results obtained showed good agreement with the experiment. Third, the fracture surfaces were observed macroscopically and by scanning electron microscopy/energy dispersive spectroscopy. The results demonstrated significant distinctions in the forces required to extract implants with varying thread geometries, clearly indicating the impact of implant design on their mechanical stability. The presented FEM-based methodology provides a reliable tool to study mechanical interactions at the implant–bone interface. The findings obtained can improve our understanding of implant behavior in biological systems and provide a basis for further optimization of their design.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanics, Materials and Biomedical Engineering, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Smoluchowskiego 25, 50-372 Wroclaw, Poland.
- Department of Lightweight Elements Engineering, Foundry and Automation, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Smoluchowskiego 25, 50-372 Wroclaw, Poland.
- Independent Researcher, 405300 Gherla, Romania.
- Independent Researcher, Rzeszowska 2, 68-200 Zary, Poland.
ORCID-Profile: Karina Krawiec, Adam Kurzawa, Jakub J Słowiński, Łukasz Pałka
Zitieren
APA
Krawiec, K., Kurzawa, A., Słowiński, J. J., Fodor, C. R., & Pałka, Ł. (2025). Experimental Biomechanical Analysis of the Bone-to-Implant Connection in Single-Piece Implants. Journal of Functional Biomaterials, 16(10), 393. https://doi.org/10.3390/jfb16100393
Vancouver
Krawiec K, Kurzawa A, Słowiński JJ, Fodor CR, Pałka Ł. Experimental Biomechanical Analysis of the Bone-to-Implant Connection in Single-Piece Implants. Journal of Functional Biomaterials. 2025;16(10):393. doi:10.3390/jfb16100393
BibTeX
@article{Krawiec2025,
author = {Krawiec, Karina and Kurzawa, Adam and Słowiński, Jakub J and Fodor, Calin Romulus and Pałka, Łukasz},
title = {Experimental Biomechanical Analysis of the Bone-to-Implant Connection in Single-Piece Implants},
journal = {Journal of Functional Biomaterials},
year = {2025},
volume = {16},
number = {10},
pages = {393},
doi = {10.3390/jfb16100393}
}
EUVIMED