EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrospun Polycaprolactone–Gelatin Fibrils Enabled 3D Hydrogel Microcapsules for Biomedical Applications

Felix Tettey-Engmann iD, Thakur Sapkota, Sita Shrestha, Narayan Bhattarai iD, Salil Desai iD

Journal of Functional Biomaterials · 02.03.2025 · 16 (3) · 85

DOI: 10.3390/jfb16030085 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 02.03.2025. Verfasst von Felix Tettey-Engmann und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical, Biological and Bioengineering, North Carolina A&T State University, Greensboro, NC 27411, USA. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. National Science Foundation, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microcapsules provide a microenvironment by improving the protection and delivery of cells and drugs to specific tissue areas, promoting cell integration and tissue regeneration. Effective microcapsules must not only be permeable for micronutrient diffusion but mechanically stable. Alginate hydrogel is one of the commonly used biomaterials for fabricating microcapsules due to its gel-forming ability and low toxicity. However, its mechanical instability, inertness, and excessive porosity have impeded its use. Embedding nanofibrils in the alginate hydrogel microcapsules improves their biological and mechanical properties. In this research, electrospun composite nanofibers of PCL–gelatin (PG) were first fabricated, characterized, and cryoground. The filtered and cryoground powder solution was mixed with the alginate solution and through electrospray, fabricated into microcapsules. Parameters such as flow rate, voltage, and hydrogel composition, which are critical in the electrostatic encapsulation process, were optimized. The microcapsules were further immersed in different solvent environments (DI water, complete media, and PBS), which were observed and compared for their morphology, size distribution, and mechanical stability properties. The average diameters of the PG nanofibers ranged between 0.2 and 2 μm, with an average porosity between 58 and 73%. The average size of the microcapsules varied between 300 and 900 μm, depending on the solvent environment. Overall, results showed an improved alginate 3D hydrogel network suitable for biomedical applications.

Schlagwörter

Stichwörter der Autor:innen

3D alginate hydrogelelectrosprayinggelatinmicrocapsulesnanofibrilspolycaprolactone

Autor:innen und Institutionen

  • Department of Chemical, Biological and Bioengineering, North Carolina A&T State University, Greensboro, NC 27411, USA.
  • Department of Industrial and Systems Engineering, North Carolina A&T State University, Greensboro, NC 27411, USA.
  • Department of Applied Science and Technology, North Carolina A&T State University, Greensboro, NC 27411, USA.

ORCID-Profile: Felix Tettey-Engmann, Narayan Bhattarai, Salil Desai

Förderung

  • U.S. National Science Foundation
  • National Science Foundation

Zitieren

APA

Tettey-Engmann, F., Sapkota, T., Shrestha, S., Bhattarai, N., & Desai, S. (2025). Electrospun Polycaprolactone–Gelatin Fibrils Enabled 3D Hydrogel Microcapsules for Biomedical Applications. Journal of Functional Biomaterials, 16(3), 85. https://doi.org/10.3390/jfb16030085

Vancouver

Tettey-Engmann F, Sapkota T, Shrestha S, Bhattarai N, Desai S. Electrospun Polycaprolactone–Gelatin Fibrils Enabled 3D Hydrogel Microcapsules for Biomedical Applications. Journal of Functional Biomaterials. 2025;16(3):85. doi:10.3390/jfb16030085

BibTeX
@article{TetteyEngmann2025,
  author = {Tettey-Engmann, Felix and Sapkota, Thakur and Shrestha, Sita and Bhattarai, Narayan and Desai, Salil},
  title = {Electrospun Polycaprolactone–Gelatin Fibrils Enabled 3D Hydrogel Microcapsules for Biomedical Applications},
  journal = {Journal of Functional Biomaterials},
  year = {2025},
  volume = {16},
  number = {3},
  pages = {85},
  doi = {10.3390/jfb16030085}
}
Kostenlos starten →