EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Method for Fabricating the Undulating Structures at Dermal—Epidermal Junction by Composite Molding Process

Hao Qiao, Chuang Gao, Chunxiang Lu, Huazhen Liu, Yi Zhang, Aoxiang Jin, Qiqi Dai, Shihmo Yang, Bing Zhang iD, Yuanyuan Liu iD

Journal of Functional Biomaterials · 15.04.2024 · 15 (4) · 102

DOI: 10.3390/jfb15040102 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 15.04.2024. Verfasst von Hao Qiao und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200444, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The dermal–epidermal junction (DEJ), located between the dermal–epidermal layers in human skin tissue, plays a significant role in its function. However, the limitations of biomaterial properties and microstructure fabrication methods mean that most current tissue engineered skin models do not consider the existence of DEJ. In this study, a nanofiber membrane that simulates the fluctuating structure of skin DEJ was prepared by the composite molding process. Electrospinning is a technique for the production of nanofibers, which can customize the physical and biological properties of biomaterials. At present, electrospinning technology is widely used in the simulation of customized natural skin DEJ. In this study, four different concentration ratios of poly (lactic-co-glycolic acid) (PLGA) and polycaprolactone (PCL) nanofiber membranes were prepared based on electrospinning technology. We selected a 15%PLGA + 5%PCL nanofiber membrane with mechanical properties, dimensional stability, hydrophilicity, and biocompatibility after physical properties and biological characterization. Then, the array-based microstructure model was prepared by three-dimensional (3D) printing. Subsequently, the microstructure was created on a 15%PLGA + 5%PCL membrane by the micro-imprinting process. Finally, the cell proliferation and live/dead tests of keratinocytes (HaCaTs) and fibroblasts (HSFs) were measured on the microstructural membrane and flat membrane. The results showed that 15%PLGA + 5%PCL microstructure membrane was more beneficial to promote the adhesion and proliferation of HaCaTs and HSFs than a flat membrane.

Schlagwörter

Stichwörter der Autor:innen

3D printingPLGA-PCL nanofiberselectrospinningmicro-imprintingmicrostructure

Autor:innen und Institutionen

  • School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200444, China.
  • School of Medicine, Shanghai University, Shanghai 200444, China.

ORCID-Profile: Bing Zhang, Yuanyuan Liu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Qiao, H., Gao, C., Lu, C., Liu, H., Zhang, Y., Jin, A., Dai, Q., Yang, S., Zhang, B., & Liu, Y. (2024). A Novel Method for Fabricating the Undulating Structures at Dermal—Epidermal Junction by Composite Molding Process. Journal of Functional Biomaterials, 15(4), 102. https://doi.org/10.3390/jfb15040102

Vancouver

Qiao H, Gao C, Lu C, Liu H, Zhang Y, Jin A, et al. A Novel Method for Fabricating the Undulating Structures at Dermal—Epidermal Junction by Composite Molding Process. Journal of Functional Biomaterials. 2024;15(4):102. doi:10.3390/jfb15040102

BibTeX
@article{Qiao2024,
  author = {Qiao, Hao and Gao, Chuang and Lu, Chunxiang and Liu, Huazhen and Zhang, Yi and Jin, Aoxiang and Dai, Qiqi and Yang, Shihmo and Zhang, Bing and Liu, Yuanyuan},
  title = {A Novel Method for Fabricating the Undulating Structures at Dermal—Epidermal Junction by Composite Molding Process},
  journal = {Journal of Functional Biomaterials},
  year = {2024},
  volume = {15},
  number = {4},
  pages = {102},
  doi = {10.3390/jfb15040102}
}
Kostenlos starten →