Effect of Silicon Carbide Fiber Length on the Flexural Strength and Flexural Modulus of Short Silicon Carbide Fiber-Reinforced Resin
Journal of Functional Biomaterials · 26.01.2024 · 15 (2) · 30
DOI: 10.3390/jfb15020030 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 26.01.2024. Verfasst von Norimasa Taka und 4 weiteren Autor:innen. Beteiligte Einrichtung: Division of Preventive Dentistry, Faculty of Dentistry, Graduate School of Medical and Dental Sciences, Niigata University, 2-5274 Gakkocho-dori, Chu…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science.
Abstract (Originalsprache)
Silicon carbide fibers have superior flexural properties and chemical stability compared to glass fibers. We investigated the flexural strength and modulus of an experimental, short silicon carbide fiber-reinforced resin. Short silicon carbide fibers with lengths of ~0.5, 1, 2, and 3 mm were prepared and silanized. Urethane dimethacrylate and triethylene glycol dimethacrylate were mixed at a 70:30 wt% ratio and used as the matrix resins. Each length of short silicon carbide fibers and the matrix resin were combined using a mixing machine and then used for specimen preparation. The three-point bending test conditions were in accordance with ISO 4049:2009. The fracture surfaces of the specimens after the three-point bending test were observed using secondary electron images. The data were statistically analyzed with a one-way analysis of variance and Tukey’s HSD test (α = 0.05). The flexural strength and modulus of the specimens containing 2 mm or 3 mm silicon carbide fibers were significantly higher than the other specimens. The river pattern was observed more clearly in specimens containing shorter silicon carbide fibers, although this pattern was observed in all specimens.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Division of Preventive Dentistry, Faculty of Dentistry, Graduate School of Medical and Dental Sciences, Niigata University, 2-5274 Gakkocho-dori, Chuo-ku, Niigata 951-8514, Japan.
- Division of Bio-Prosthodontics, Faculty of Dentistry, Graduate School of Medical and Dental Sciences, Niigata University, 2-5274 Gakkocho-dori, Chuo-ku, Niigata 951-8514, Japan.
- Division of Biomimetics, Faculty of Dentistry, Graduate School of Medical and Dental Sciences, Niigata University, 2-5274 Gakkocho-dori, Chuo-ku, Niigata 951-8514, Japan.
ORCID-Profile: Norimasa Taka, Hiroshi Ogawa
Förderung
- Japan Society for the Promotion of Science
Zitieren
APA
Taka, N., Aoyagi, Y., Miida, K., Kanatani, M., & Ogawa, H. (2024). Effect of Silicon Carbide Fiber Length on the Flexural Strength and Flexural Modulus of Short Silicon Carbide Fiber-Reinforced Resin. Journal of Functional Biomaterials, 15(2), 30. https://doi.org/10.3390/jfb15020030
Vancouver
Taka N, Aoyagi Y, Miida K, Kanatani M, Ogawa H. Effect of Silicon Carbide Fiber Length on the Flexural Strength and Flexural Modulus of Short Silicon Carbide Fiber-Reinforced Resin. Journal of Functional Biomaterials. 2024;15(2):30. doi:10.3390/jfb15020030
BibTeX
@article{Taka2024,
author = {Taka, Norimasa and Aoyagi, Yujin and Miida, Keito and Kanatani, Mitsugu and Ogawa, Hiroshi},
title = {Effect of Silicon Carbide Fiber Length on the Flexural Strength and Flexural Modulus of Short Silicon Carbide Fiber-Reinforced Resin},
journal = {Journal of Functional Biomaterials},
year = {2024},
volume = {15},
number = {2},
pages = {30},
doi = {10.3390/jfb15020030}
}
EUVIMED