EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Biomaterials Adapted to Vat Photopolymerization in 3D Printing: Characteristics and Medical Applications

Iosif-Aliodor Timofticiuc iD, Octavian Călinescu iD, Adrian Iftime iD, Serban Dragosloveanu, Ana Caruntu iD, Andreea-Elena Scheau, Ioana Anca Badarau, Andreea Cristiana Didilescu iD, Constantin Caruntu iD, Cristian Scheau iD

Journal of Functional Biomaterials · 22.12.2023 · 15 (1) · 7

DOI: 10.3390/jfb15010007 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 22.12.2023. Verfasst von Iosif-Aliodor Timofticiuc und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physiology, The "Carol Davila" University of Medicine and Pharmacy, 8 Eroii Sanitari Boulevard, 050474 Bucharest, Romania. Die Arbeit wurde bisher 61-mal zitiert (Crossref) und nennt 164 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Along with the rapid and extensive advancements in the 3D printing field, a diverse range of uses for 3D printing have appeared in the spectrum of medical applications. Vat photopolymerization (VPP) stands out as one of the most extensively researched methods of 3D printing, with its main advantages being a high printing speed and the ability to produce high-resolution structures. A major challenge in using VPP 3D-printed materials in medicine is the general incompatibility of standard VPP resin mixtures with the requirements of biocompatibility and biofunctionality. Instead of developing completely new materials, an alternate approach to solving this problem involves adapting existing biomaterials. These materials are incompatible with VPP 3D printing in their pure form but can be adapted to the VPP chemistry and general process through the use of innovative mixtures and the addition of specific pre- and post-printing steps. This review’s primary objective is to highlight biofunctional and biocompatible materials that have been adapted to VPP. We present and compare the suitability of these adapted materials to different medical applications and propose other biomaterials that could be further adapted to the VPP 3D printing process in order to fulfill patient-specific medical requirements.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingbiocompatibledigital light processingstereolitographyvat photopolymerization

Autor:innen und Institutionen

  • Department of Physiology, The "Carol Davila" University of Medicine and Pharmacy, 8 Eroii Sanitari Boulevard, 050474 Bucharest, Romania.
  • Department of Biophysics, The "Carol Davila" University of Medicine and Pharmacy, 8 Eroii Sanitari Boulevard, 050474 Bucharest, Romania.
  • Department of Orthopaedics and Traumatology, The "Carol Davila" University of Medicine and Pharmacy, 050474 Bucharest, Romania.
  • Department of Orthopaedics, "Foisor" Clinical Hospital of Orthopaedics, Traumatology and Osteoarticular TB, 021382 Bucharest, Romania.
  • Department of Oral and Maxillofacial Surgery, "Carol Davila" Central Military Emergency Hospital, 010825 Bucharest, Romania.
  • Department of Oral and Maxillofacial Surgery, Faculty of Dental Medicine, Titu Maiorescu University, 031593 Bucharest, Romania.

ORCID-Profile: Iosif-Aliodor Timofticiuc, Octavian Călinescu, Adrian Iftime, Ana Caruntu, Andreea Cristiana Didilescu, Constantin Caruntu, Cristian Scheau

Zitieren

APA

Timofticiuc, I. A., Călinescu, O., Iftime, A., Dragosloveanu, S., Caruntu, A., Scheau, A. E., Badarau, I. A., Didilescu, A. C., Caruntu, C., & Scheau, C. (2023). Biomaterials Adapted to Vat Photopolymerization in 3D Printing: Characteristics and Medical Applications. Journal of Functional Biomaterials, 15(1), 7. https://doi.org/10.3390/jfb15010007

Vancouver

Timofticiuc IA, Călinescu O, Iftime A, Dragosloveanu S, Caruntu A, Scheau AE, et al. Biomaterials Adapted to Vat Photopolymerization in 3D Printing: Characteristics and Medical Applications. Journal of Functional Biomaterials. 2023;15(1):7. doi:10.3390/jfb15010007

BibTeX
@article{Timofticiuc2023,
  author = {Timofticiuc, Iosif-Aliodor and Călinescu, Octavian and Iftime, Adrian and Dragosloveanu, Serban and Caruntu, Ana and Scheau, Andreea-Elena and Badarau, Ioana Anca and Didilescu, Andreea Cristiana and Caruntu, Constantin and Scheau, Cristian},
  title = {Biomaterials Adapted to Vat Photopolymerization in 3D Printing: Characteristics and Medical Applications},
  journal = {Journal of Functional Biomaterials},
  year = {2023},
  volume = {15},
  number = {1},
  pages = {7},
  doi = {10.3390/jfb15010007}
}
Kostenlos starten →