EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sacrificial-Rotating Rod-Based 3D Bioprinting Technique for the Development of an In Vitro Cardiovascular Model

Jooyoung Lee, Hyungseok Lee

Journal of Functional Biomaterials · 19.12.2023 · 15 (1) · 2

DOI: 10.3390/jfb15010002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 19.12.2023. Verfasst von Jooyoung Lee und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Smart Health Science and Technology, Kangwon National University (KNU), Chuncheon 24341, Republic of Korea. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Several studies have attempted to develop complex cardiovascular models, but the use of multiple cell types and poor cell alignments after fabrication have limited the practical application of these models. Among various bioprinting methods, extrusion-based bioprinting is the most widely used in the bioengineering field. This method not only has the potential to construct complex 3D biological structures but it also enables the alignment of cells in the printing direction owing to the application of shear stress to the cells during the printing process. Therefore, this study developed an in vitro cardiovascular model using an extrusion-based bioprinting method that utilizes a rotating rod as a printing platform. The rotating rod was made of polyvinyl alcohol (PVA) and used as a sacrificial rod. This rotating platform approach enabled the printing of longer tubular-vascular structures of multiple shapes, including disease models, and the water-soluble properties of PVA facilitated the isolation of the printed vascular models. In addition, this method enabled the printing of the endothelial cells in the bloodstream direction and smooth muscle cells in the circumferential direction to better mimic the anatomy of real blood vessels. Consequently, a cardiovascular model was successfully printed using a gelatin methacryloyl bioink with cells. In conclusion, the proposed fabrication method can facilitate the fabrication of various cardiovascular models that mimic the alignment of real blood vessels.

Schlagwörter

Stichwörter der Autor:innen

GelMAcardiovascularcell alignmentextrusion-based bioprintingsacrificial

Autor:innen und Institutionen

  • Department of Smart Health Science and Technology, Kangwon National University (KNU), Chuncheon 24341, Republic of Korea.
  • Department of Mechanical and Biomedical Engineering, Kangwon National University (KNU), Chuncheon 24341, Republic of Korea.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Lee, J., & Lee, H. (2023). Sacrificial-Rotating Rod-Based 3D Bioprinting Technique for the Development of an In Vitro Cardiovascular Model. Journal of Functional Biomaterials, 15(1), 2. https://doi.org/10.3390/jfb15010002

Vancouver

Lee J, Lee H. Sacrificial-Rotating Rod-Based 3D Bioprinting Technique for the Development of an In Vitro Cardiovascular Model. Journal of Functional Biomaterials. 2023;15(1):2. doi:10.3390/jfb15010002

BibTeX
@article{Lee2023,
  author = {Lee, Jooyoung and Lee, Hyungseok},
  title = {Sacrificial-Rotating Rod-Based 3D Bioprinting Technique for the Development of an In Vitro Cardiovascular Model},
  journal = {Journal of Functional Biomaterials},
  year = {2023},
  volume = {15},
  number = {1},
  pages = {2},
  doi = {10.3390/jfb15010002}
}
Kostenlos starten →